AM29LV160DT-70FI Datasheet – 16 Megabit, Flash Memory

Part Number: AM29LV160DT-70FI

Function: 16 Megabit (2 M x 8-bit/1 M x 16-bit) CMOS 3.0 volt-only boot sector flash memory

Package: 48-Pin Thin Small Outline Package (TSOP)

Manufacturer: Advanced Micro Devices

Image and Pinouts:

AM29LV160DT-70FI datasheet



The AM29LV160DT-70FI is a 16 Mbit, 3.0 Volt-only Flash memory organized as 2,097,152 bytes or 1,048,576 words. The device is offered in 48-ball FBGA, 44-pin SO, and 48-pin TSOP packages. The word-wide data (x16) appears on DQ15–DQ0; the byte-wide (x8) data appears on DQ7–DQ0. This device is designed to be programmed in-system with the standard system 3.0 volt VCCsupply. A 12.0 V VPPor 5.0 VCCare not required for write or erase operations. The device can also be programmed in standard EPROM programmers.

The device requires only a single 3.0 volt power supplyfor both read and write functions. Internally generated and regulated voltages are provided for the program and erase operations.  The Am29LV160D is entirely command set compatible with the JEDEC single-power-supply Flash standard. Commands are written to the command register using standard microprocessor write timings. Register contents serve as input to an internal state-machine that controls the erase and programming circuitry. Write cycles also internally latch addresses and data needed for the programming and erase operations. Reading data out of the device is similar to reading from other Flash or EPROM devices.


1. Single power supply operation

(1) Full voltage range: 2.7 to 3.6 volt read and write operations for battery-powered applications

(2) Regulated voltage range: 3.0 to 3.6 volt read and write operations and for compatibility with high performance 3.3 volt microprocessors

Other data sheets are available within the file:

AM29LV160DB-120EC, AM29LV160DB-120EE, AM29LV160DB-120EI,

AM29LV160DB-120FC, AM29LV160DB-120FE


AM29LV160DT-70FI Datasheet PDF Download

AM29LV160DT-70FI pdf