BP2836D PDF – Non-isolated Buck Offline LED Driver

A buck constant current LED driver is a type of power supply or driver circuit used to power and control light-emitting diodes (LEDs) with a constant current. The term “buck” refers to a specific type of DC-DC converter topology, and when combined with “constant current,” it indicates that this driver is designed to regulate the current supplied to the LED load.

Part Number: BP2836D

Function: Non-isolated Buck Offline LED Driver

Package: DIP 8 Pin

Manufacturer: BPS

Images:BP2836D pdf

Description

The BP2836D is a high precision buck constant current LED driver. The device operates in critical conduction mode and is suitable for 85Vac~265Vac universal input offline LED lighting.

The BP2836D integrates a 500V power MOSFET. With patent pending MOSFET driving technique, the operating current of the IC is very low. So it doesn’t need the auxiliary winding for supplying the chip. It can achieve excellent constant current performance with very few external components, so the system cost and size are minimized.

 

Features

1. Critical Conduction Mode Operation

2. Internal 500V Power MOSFET

3. No Auxiliary Winding

4. Ultra Low Operating Current

5. ±5% LED Output Current Accuracy

6. Current Sensing Resistor Short Protection

7. Thermal Regulation Function

Pinouts:

BP2836D pinout datasheet

Applications:

1. LED Tube

2. LED Ceiling Light

3. LED Bulb

4. Other LED Lighting

BP2836D PDF Datasheet

UTC7607 PDF Datasheet – FM IF / AM Tuner System

Part Number: UTC7607

Function: FM IF / AM Tuner System

Package: DIP 16 Pin type

Manufacturer: YOUWANG

Images:

UTC7607 pdf datasheet

Description

The UTC7607 is a monolithic integrated circuit designed for the VIF stage in color and B/W television receivers. The UTC7607 is used for Reverse AGC Type. The UTC7611 is used for Forward AGC Type.

Features

1. Three controlled IF amplifier stages

2. Video demodulator controlled by picture carrier

3. Black noise and white noise inverter

4. Peak AGC

5. DC amplifier for RF AGC output

6. Quadrature detector for AFT

7. DC amplifier for AFT

Temperatur Storage Temperatur Power dissipation LINEAR INTEGRATED CIRCUIT Vcc V4 V12 Topr Tstg PD (Ta=25°C )  (Ta=25°C,Vcc=12V,fo=45.75MHz,unless otherwise specified) Recommended Supply Voltag Quiescent circuit current Video DC output AFT DC Output Voltag AFT Output offset Voltag RF AGC Residual Output Voltag RF AGC Leak Current Video Sensitivity AGC Rang Sync Tip Level Voltage(pin12) Maximum IF Input Voltag White Noise Threshold(pin12) White Noise Clamp Level(pin12) Black Noise Threshold(pin12) Black Noise Clamp Level(pin12) Video Frequency Response Suppression of Carrier Suppression of 2 nd Carrier 920kHz Beat level Differential Gain Differential Phas Input Impedanc AFT Output Upper Voltag AFT Output Lower Voltag Maximum Available Current AFT Sensitivity Vcc ICCQ V12 V5.V6 V5-V6 V4(sat) I4(leak) SVI VAGC(IF) Vsync VI(MAX) VWTH VWCL VBTH VBCL Gv(IF) Input 45.75Mhz,Sweep generator CL SG1=100mVrms SG2,SG3 →OFF I2nd SG1=100mVrms SG2,SG3 →OFF I920 SG1=100mVrms SG2=SG3=32mVrms DG DP RIN fo=45.75MHz,between pin16~1 CIN V 5, V6(UP) V 5, V6(Low) I4(MAX) UTC7607 UTC7611 SAFT SW1:ON SW2:ON SW1:ON SW2:ON UTC7611 SW4→1 UTC7607 SW3→2 SW4 →2 UTC7611 SW4→1 UTC7607 SW3→1 SW4 →2 V12=0.8Vp-p, fo=45.75MHz,AM=30% fo=45.75MHz, YOUWANG ELECTRONICS CO.LTD 2 UTC7607/7611 0.01 5.1k LINEAR INTE […]

 

 

UTC7607 Datasheet