MX1515 PDF Datasheet – Brush DC Motor Driver

Part Number: MX1515

Function: Brush DC motor driver

Package: DIP 16 Pin Type

Manufacturer: Sinotech Mixic Electronics

Images:MX1515 datasheet

Description

This product provides an integrated brushed DC motor drive solution for battery powered toys, low voltage or battery powered motion control applications. The circuit integrates a two-channel H-bridge drive circuit designed with N-channel and P-channel power MOSFETs, which is suitable for driving electric toy cars steering wheel and rear-wheel drive. The circuit has a wide operating voltage range (from 2V to 9.6V), the maximum continuous output current of steering wheel drive reaches 1.5A, the maximum peak output current reaches 2.5A, the maximum continuous output current of rear wheel drive reaches 1.5A, and the maximum peak output current reaches 1.5A. The current reaches 2.5A. The drive circuit has a built-in overheat protection circuit. When the load current through the drive circuit is much larger than the maximum continuous current of the circuit, the junction temperature of the chip inside the circuit will rise rapidly due to the limitation of the heat dissipation capacity of the package. Once the set value (typical value of 150°C) is exceeded, the internal circuit will immediately shut down. Cut off the output power tube, cut off the load current, and avoid the safety hazards such as smoke and fire caused by the plastic package caused by the continuous increase of temperature. The built-in temperature hysteresis circuit ensures that the circuit can be controlled again only after the circuit returns to a safe temperature. […]

MX1515 pdf pinout

Features:

1. Low standby current (less than 0.1uA)

2. Low quiescent working current

3. Integrated H-bridge drive circuit

4. Built-in anti-common state conduction circuit

5. Power MOSFET tube with low conduction internal resistance

6. Built-in thermal protection circuit (TSD) with hysteresis effect

7. Antistatic level: 3KV (HBM).

MX1515 PDF Datasheet

W20NM50 PDF – 550V, 20A, MOSFET- STW20NM50

Part Number: W20NM50, STW20NM50

Function: N-Channel, 550V, 20A, MOSFET

Package: TO-247 Type

Manufacturer: STMicroelectronics

Images:STW20NM50 pdf pinout

Description

W20NM50 is N-CHANNEL, 500V – 0.20Ω – 20A, MDmesh Power MOSFET.

The MDmesh is a new revolutionary MOSFET technology that associates the Multiple Drain process with the Company’s PowerMESH™ horizontal layout. The resulting product has an outstanding low on-resistance, impressively high dv/dt and excellent avalanche characteristics. The adoption of the Company’s proprietary strip technique yields overall dynamic performance that is significantly better than that of similar competition’s products. Applications The MDmesh™ family is very suitable for increasing power density of high voltage converters allowing system miniaturization and higher efficiencies.

Features

1. TYPICAL RDS(on) = 0.20Ω

2. HIGH dv/dt AND AVALANCHE CAPABILITIES

3. 100% AVALANCHE TESTED

4. LOW INPUT CAPACITANCE AND GATE CHARGE

5. LOW GATE INPUT RESISTANCE

6. TIGHT PROCESS CONTROL AND HIGH MANUFACTURING YIELDS […]

STW20NM50 datasheet mosfet

Absolute Maximum Ratings (Ta = 25°C)

1. Drain to source voltage: VDSS = 500 V

2. Gate to source voltage: VGSS = ± 30 A

3. Drain current: ID = 20 A

4. Total Power Dissipation: Ptot = 214 W

5. Channel temperature: Tch = 150 °C

6. Storage temperature: Tstg = -65 to +150 °C

Applications:

The MDmesh family is very suitable for increasing power density of high voltage converters allowing
system miniaturization and higher efficiencies.

W20NM50 PDF Datasheet