CM1681 PDF Datasheet – 2 Channel EMI Filter

Part Number: CM1681

Function: 2 Channel EMI Filter with ESD Protection

Package: CUDFN-8 Type

Manufacturer: ON Semiconductor

Images:CM1681 datasheet filter

Description

CM1681 is 2 Channel EMI Filter with ESD Protection for Headsets/Speakers.

A 2-channel EMI (Electromagnetic Interference) filter is an electronic component used to suppress or filter out unwanted electromagnetic interference from signals passing through it. EMI filters are commonly used in various electronic devices and systems to ensure that the electromagnetic emissions from the device do not interfere with other nearby devices or systems, and to prevent external electromagnetic noise from affecting the device’s operation.

A 2-channel EMI filter specifically refers to an EMI filter with two separate filtering paths or channels. Each channel typically consists of components such as capacitors, inductors, and resistors that are designed to attenuate specific frequencies of electromagnetic interference.

Applications of 2-channel EMI filters can be found in various scenarios, such as in audio equipment, power supplies, communication systems, medical devices, industrial machinery, and more.

Features

• Two Channels of EMI Filtering

• Pi−Style EMI Filters in a Capacitor−Resistor−Capacitor (C−R−C) Network

• ±8 kV ESD Protection (IEC 61000−4−2, Contact Discharge)

• ±15 kV ESD Protection (HBM)

• Supports AC Signals − Ideal for Audio Applications

• Greater than 40 dB of Attenuation at 1 GHz

• Low Profile Height of 0.5 mm

• These Devices are Pb−Free and are RoHS Compliant

Pinouts:
CM1681 pdf pinout

Applications:

• Headset Speaker Port in Mobile Handsets

• I/O Port Protection for Mobile Handsets, Notebook Computers, PDAs, etc.

• EMI Filtering for Data Ports in Cell Phones, PDAs or Notebook Computers

 

CM1681 PDF Datasheet

BT-67L090 PDF Datasheet – Thermostat, Sensor – Airpax

Part Number: BT-67L090, 67L090, JUC-31F-90-D

Function: Thermostat

Package: TO-220-2Pin Type

Manufacturer: AIRPAX

Images:

BT-67L090 pdf Thermostat

 

Description

A thermostat is a temperature-regulating device used to control heating, cooling, or ventilation systems in various applications. It is commonly found in homes, offices, industrial facilities, and other environments where maintaining a comfortable and consistent temperature is essential.

The main purpose of a thermostat is to monitor the ambient temperature and compare it to a setpoint temperature. Based on this comparison, the thermostat activates or deactivates the heating, cooling, or ventilation system to maintain the desired temperature within a predefined range.

Contact Resistance: 50 Milliohms max. (before and after rated life) Contact Ratings: Cycles Voltage 30,000 48 VDC 30,000 120 VAC 100,000 5 VDC 100,000 5 VDC Amps (resistive) 1 1 .020 .001 Seal: Epoxy sealed for wave soldering and cleaning. Moisture proof per Airpax Spec. S-722 (unit will not leak while submerged in 9″ of water for a minimum of two minutes). Vibration: Per Mil-Std-202, Method 204D, Test Condition D, 10-2,000 Hz. Shock: Per Mil-Std-202, Method 213,Test Condition C, 100 G’s, 6 milliseconds, ⁄/™ sine wave. Chemical Resistance: Unit is resistant to water, salt, alcohol, ammonia, trichlorethane, and most other organic solvents. Solderability: Terminal material is selectively striped with 60/40 solder for improved solderability. Contact Operations: Either open on rise or close on rise Operating Temperature Range: 40°C (104°F) to 130°C (266°F) Standard Operating Temperature Tolerance: ±5°C (±9°F) Nominal operating temperature settings in 5°C (9°F) increments US Patent No: 4,795,997 Short Term Exposure Limit: 260°C (500°F), 10 sec. Long Term Exposure Limit: -55°C (-67°F) to 160°C (320°F) Dielectric Strength: 1480 VAC 60Hz, 1 second terminals to case for nickel-plated copper bracket. 2000 VAC 60Hz, 1 second terminals to case for plastic bracket. Insulation Resistance: 100 Megohms at 500 VDC Contact Bounce – make: 3 ms max. Weight: Approximately 0.5 grams Resistance to Soldering Heat: Per Mil-Std-202F, Method 210A,Test Condition E. File Numbers: UL Recognized E36687 CSA Certified LR25561 VDE Approval 11624, 2-4510-1004 (plastic bracket only) MATERIALS Seal: High temperature epoxy Base: PPS (Polyphenylene Sulfide), 94 VO rated Terminals: 65% Copper, 18% Nickel Contacts: Gold-plated or overlay, Silver cross bar Bracket: Nickel-plated copper or high pressure laminated plastic Airpax 6700 Series [ … ]

BT-67L090 datasheet pinout

 

BT-67L090 PDF Datasheet