D78F9177 PDF – 8-Bit Single-Chip Microcontroller – NEC

This post describes for the Microcontroller.

The Part Number is D78F9177, uPD78F9177.

The function of this semiconductor is 8-BIT SINGLE-CHIP MICROCONTROLLER.

The package is QFP 44 Pin Type

The manufacturer of this part is NEC.

See the preview image and the PDF file for more information.

D78F9177 pdf datasheet

Description

The D78F9177 is 8-Bit Single-Chip Microcontroller.

An 8-bit single-chip microcontroller refers to a type of microcontroller that has an 8-bit architecture. It is a complete computing system integrated onto a single chip.

Microcontrollers are programmable integrated circuits designed to control and manage various functions in electronic devices. They typically consist of a central processing unit (CPU), memory (both volatile and non-volatile), input/output (I/O) ports, timers, and sometimes analog-to-digital converters (ADCs) and other peripherals.

The “8-bit” specification indicates the word size or data width of the microcontroller’s CPU. It means that the microcontroller can process data in 8-bit chunks, allowing it to manipulate binary numbers and perform calculations on 8 bits at a time. The 8-bit architecture is considered relatively simple and is often used in applications where cost, power consumption, or size constraints are important factors.

The uPD78F9177 and uPD78F9177Y are uPD789177, 789177Y Subseries (small, general-purpose) in the 78K/0S Series. The uPD78F9177 replaces the internal ROM of the uPD789176 and uPD789177 with flash memory, while the uPD78F9177Y replaces the ROM of the uPD789176Y and uPD789177Y with flash memory. Because flash memory allows the program to be written and erased electrically with the device mounted on the board, this product is ideal for the evolution stages of system development, small-scale production and rapid development of new products.

Features:

• Pin compatible with mask ROM version (except VPP pin)

• Flash memory: 24 Kbytes

• High-speed RAM: 512 bytes

• Minimum instruction execution time can be changed from high-speed (0.4 ms: @5.0-MHz operation with main system clock) to ultra-low-speed (122 ms: @ 32.768-kHz operation with subsystem clock)

• 10-bit resolution A/D converter: 8 channels

• I/O ports: 31

• Serial interface: 2 channels

• 3-wire serial I/O mode / UART mode: 1 channel

• SMB (mPD78F9177Y only): 1 channel

• Timers: 6 channels

• 16-bit timer: 1 channel

• 8-bit timer/event counter: 2 channels

• 8-bit timer: 1 channel

• Watch timer: 1 channel

• Watchdog timer: 1 channel

• On-chip 16-bit multiplier

• Power supply voltage: VDD = 1.8 to 5.5 V

[…]

D78F9177 pinout microcontroller

D78F9177 PDF Datasheet

STR-W6053S PDF Datasheet – Off-Line PWM Controller

Part Number: STR-W6053S

Function: Off-Line PWM Controller

Package: TO220F-6L Type

Manufacturer: Sanken

Images:STR-W6053S pdf pinout

Description

This is Off-Line PWM Controllers with Integrated Power MOSFET. The STR-W6000S, STR-W6053S series are power ICs for switching power supplies, incorporating a MOSFET and a current mode PWM controller IC. The low standby power is accomplished by the automatic switching between the PWM operation in normal operation and the burst-oscillation under light load conditions. The product achieves high cost-performance power supply systems with few external components.

An offline PWM (Pulse-Width Modulation) controller, also known as a flyback controller, is an integrated circuit (IC) or electronic device used in power supply and power conversion applications. Its primary function is to regulate the output voltage of a power supply by controlling the duty cycle of a switching transistor, typically in a flyback topology. Offline PWM controllers are commonly used in various power supply designs, including AC-DC converters, DC-DC converters, and isolated power supplies.

Features

1. Current Mode Type PWM Control

2. Brown-In and Brown-Out function

3. Auto Standby Function No Load Power Consumption < 30 mW

4. Operation Mode :

(1) Normal Operation : PWM Mode

(2) Standby : Burst Oscillation Mode

5. Random Switching Function

6. Slope Compensation Function

7. Leading Edge Blanking Function

8. Bias Assist Function

9. Audible Noise Suppression function during Standby mode

STR-W6053S datasheet

 

Applications:

1. White goods

2. Office automation equipment

3. Industrial equipment

STR-W6053S PDF Datasheet