FL817 PDF Datasheet – Phototransistor, Photocoupler

A photocoupler, also known as an optocoupler or an optoisolator, is an electronic component or device used to transfer electrical signals or data between two isolated circuits using light as the medium of communication. The primary purpose of a photocoupler is to provide electrical isolation and noise immunity between input and output circuits. This isolation helps protect sensitive components, such as microcontrollers or sensors, from voltage spikes, noise, or potential hazards in the input circuit.

Part Number: FL817

Function: Phototransistor Detector

Package: DIP 4 Pin Type

Manufacturer: FANGJING

Images:FL817 pdf Phototransistor

Description

The FL817 series of devices each consist of an infrared Emitting diodes, optically coupled to a phototransistor detector. They are packaged in a 4-pin DIP package and available in Wide-lead spacing and SMD option.

 

Features

1. Current transfer ratio : (CTR:50%-600% at IF=5mA,VCE=5V)

2. High isolation voltage between input and output (Viso=5000V rms)

3. Creepage distance>7.62mm

4. Pb free and ROHS compliant

FL817 pinout datasheet

 

Applications:

1. Programmable controllers

2. System appliances,measuring instruments

3. Telecommunication equipments

4. Home appliances,such as fan heaters,etc

FL817 PDF Datasheet

WT61P802 PDF – Microcontroller for Flat Panel Display Control

Part Number: WT61P802

Function: Flat Panel Display Control Sub-MCU

Package: LQFP 44, LQFP 48 Pin Type

Manufacturer: Weltrend Semiconductor

Images:

WT61P802 datasheet

Description

The WT61P802 is a microcontroller for flat panel display control and power management with

1) Turbo 8052 CPU, 2) 64K bytes flash memory, 3) 1K+256 bytes SRAM, 4) 8 8-bit PWMs, 5) DPMS detector(2 H/V inputs, Support H+V input) , 6) 4 timers and 2 UART Ports, 7) 2 DDC/CI interface, 8) Slave I2C interface, 9) 8 channel 8-bit A/D converter, 10) Real Time Clock, 11) Watch-dog timer, 12) Embedded ISP function, 13) Power down mode, 14) Embedded ICE mode. 15) H/W CEC […]

Block Diagram:

WT61P802 datasheet

A Flat Panel Display Control Sub-MCU, or simply a Display Sub-MCU, is a microcontroller unit within a flat panel display or a related electronic device that is responsible for controlling and managing various functions associated with the display. Flat panel displays include technologies such as LCD (Liquid Crystal Display), OLED (Organic Light-Emitting Diode), and TFT (Thin-Film Transistor) displays, which are commonly used in televisions, computer monitors, smartphones, tablets, and other electronic devices.

Features

1. 4 similar 8052 timers: Timer0, Timer1, Timer2, Timer3

2. 2 similar 8052 UART ports, support baud rate 115200 – 1200 at OSC = 12MHz

3. Sync processor for monitoring DPMS (support 2 H/V inputs, Support H+V inputs) wake up signal.

4. 8-bit A/D converter with 8 selectable inputs, shared with IO pin

5. 8 8-bit PWM pin output (One low frequency PWM at 150Hz for dimmer control)

6. Support 2 DDC/CI interface

7. Slave mode I2C interface

8. Maximum 37 programmable IO pins

9. Hardware universal IR Receiver

10. Watch Dog timer

11. Build-in RTC

12. Build-in ISP function

WT61P802 PDF Datasheet