SMB135 PDF Datasheet – Battery Charger IC

Part Number: SMB135

Function: Single-cell lithium-ion/lithium-polymer battery charger

Package: Small 1.3 x 2.1 uCSP-15 package (0.4mm pitch) Type

Manufacturer: Summit

Images:SMB135 pdf pinout

Description

The SMB135 is a programmable single-cell lithium-ion/lithium-polymer battery charger for a variety of portable applications. The device provides a simple and efficient way to charge high-capacity Li-Ion batteries via a USB port or an AC adapter. Unlike conventional devices, the IC’s high-efficiency operation eliminates large internal temperature rise and localized hot spot in handheld equipment. Summit’s proprietary TurboChargeTM mode allows a 750mA charge current from a 500mA USB port, resulting to significantly reduced charge times.

Charge control includes qualification, trickle-charge, pre-charge, constant current/constant voltage, and termination/safety settings that are fully programmable via a serial I2C/SMBus making the device truly
a flexible solution. Fast charge current level (one or five unit loads) can be set via I2C or an input pin (USB500/100).

Features

• 4.35 to 6.5V input voltage range

• High-accuracy output voltage regulation: 1%

• Low reverse leakage current

• Status/Fault indicator

• Stability with ceramic capacitors

• Wide range of protection features […]

SMB135 datasheet

Applications:

• GSM Handsets

• UMTS Handsets

• Portable Media & Gaming Players

• Digital camcorders/still cameras

• Handheld GPS/PDAs

SMB135 PDF Datasheet

SD4841 PDF – Current Mode PWM Controller – Silan

What is SD4841?

This is Current Mode PWM Controller. A current mode PWM (Pulse Width Modulation) controller is an electronic device used in power electronic circuits to regulate the output voltage of a power supply. It compares a reference signal to a feedback signal from the output of the power supply and adjusts the duty cycle of the PWM signal sent to a power switch to maintain the desired output voltage.

Function: Current Mode PWM Controller

Package : DIP 8 Pin type

Manufacturer: Silan Microelectronics

Images:
1 page
SD4841 datasheet

 

Description

SD4841 is a current mode PWM controller with low standby power and low start current for power switch. In standby mode, the circuit enters burst mode to reduce the standby power dissipation.
The switch frequency is 67KHz with ±2.5 KHz jitter frequency for low EMI.
The stress on transformer during power on is reduced by the built-in 15ms soft start circuit to avoid the saturation of transformer. […]

2 page
SD4841 controller

Features

1. Lower start-up current (Typ.6μA)

2. Frequency jitter for low EMI

3. Overcurrent protection

4. Overvoltage protection

5. Undervoltage lockout

6. Built-in temperature protection

7. Built-in high voltage MOSFET

8. Auto restart mode

9. Built-in soft start

10. Burst mode operation

11. Cycle by cycle current limit

SD4841 PDF Datasheet

Posts related to ‘ PWM Controller ‘

Part number Description
OB2273 PWM Controller, SOT23-6
CR6842 Green-Power PWM Controller
RT8880A Dual-Output PWM Controller
LX1684 Voltage Mode PWM Controller
OB2268AP Current Mode PWM Controller
1250B65 Current-Mode PWM Controller
RT8800 PWM Controller – Richtek
HS9-1825ARH Current Mode PWM Controller
L2269 L2269 – Current Mode PWM Controller
OZT1060 Phase-Shift PWM Controller – O2Micro