RT6908 PDF Datasheet – PMIC for TFT LCD TV Panel

Part Number: RT6908

Function: PMIC for TFT LCD TV Panel

Package: Thin 40-Lead WQFN Type

Manufacturer: Richtek

Images:RT6908 pdf pinout

Description

The RT6908 provides a complete set of programmable multi-functional power solution for TFT LCD panel. The RT6908 contains a step-up converter for main power and step-down controllers to provide the logic voltages for the system.

Moreover, a positive charge pump regulator provides the adjustable gate-high voltage, VGH; a negative charge pump regulator provides the gate-low voltage, VGL. AVDD, VGH and VGL outputs and power sequence can be programmable through I2C interface. With its high current capabilities, the device is ideal for large screen monitor panels and LCD TV applications with 12V supply voltage.

Features

1. 9V to 16V Input Supply Voltage

2. 4.4A Boost Regulator for AVDD with 12.7V to 19V Programmable Output

3. 1-CH Sync. Buck Converter for VI/O

4. 1-CH Sync. Buck Controller for VCOREz Programmable Sequencing

5. Voltage Detection Output

6. Over Temperature Protection

7. I2C Compatible Interface for Register Control

Application Circuits:

RT6908 datasheet

RT6908 PDF Datasheet

29F64G08CBAAA PDF Datasheet – 64Gb, NAND Flash Memory

NAND flash memory is a type of non-volatile storage technology that is widely used in electronic devices for data storage, such as smartphones, solid-state drives (SSDs), USB drives, memory cards, and more. It is a key component in modern digital devices due to its high storage capacity, fast read and write speeds, and durability.

Part Number: 29F64G08CBAAA, MT29F64G0BAAA

Function: 64Gb, NAND Flash Memory

Package: 48-pin TSOP Type

Manufacturer: Micron

Images:29F64G08CBAAA pdf memory

Description

29F64G08CBAAA is 64Gb, NAND Flash Memory. Micron NAND Flash devices include an asynchronous data interface for high-performance I/O operations. These devices use a highly multiplexed 8-bit bus (DQx) to transfer commands,address, and data. There are five control signals used to implement the asynchronous data interface: CE#, CLE, ALE, WE#, and RE#. Additional signals control hardware write protection (WP#) and monitor device status (R/B#).

Features

• Open NAND Flash Interface (ONFI) 2.2-compliant1

• Multiple-level cell (MLC) technology

• Organization – Page size x8: 8640 bytes (8192 + 448 bytes) – Block size: 256 pages (2048K + 112K bytes) – Plane size: 2 planes x 2048 blocks per plane – Device size: 64Gb: 4096 blocks; 128Gb: 8192 blocks; 256Gb: 16,384 blocks; 512Gb: 32,786 blocks

• Synchronous I/O performance – Up to synchronous timing mode 5 – Clock rate: 10ns (DDR) – Read/write throughput per pin: 200 MT/s

• Asynchronous I/O performance – Up to asynchronous timing mode 5 – tRC/tWC: 20ns (MIN) • Array performance – Read page: 50µs (MAX) – Program page: 1300µs (TYP) – Erase block: 3ms (TYP) • Operating Voltage Range – VCC: 2.7–3.6V – VCCQ: 1.7–1.95V, 2.7–3.6V • Command set: ONFI NAND Flash Protocol

• RESET (FFh) required as first command after poweron

• Operation status byte provides software method for detecting

• Data strobe (DQS) signals provide a hardware method for synchronizing data DQ in the synchronous interface

• Copyback operations supported within the plane from which data is read

Pinouts:
29F64G08CBAAA pinout datasheet

Types of NAND Flash:

1. Single-Level Cell (SLC): Stores one bit per cell, offering high performance and endurance. Often used in industrial and enterprise applications.

2. Multi-Level Cell (MLC): Stores multiple bits per cell, providing higher capacity at a lower cost than SLC. Used in a range of consumer and enterprise devices.

3. Triple-Level Cell (TLC): Stores three bits per cell, offering even higher capacity but with slightly reduced endurance compared to MLC.

4. Quad-Level Cell (QLC): Stores four bits per cell, further increasing capacity but potentially impacting endurance and performance.

29F64G08CBAAA PDF Datasheet