93C46 PDF Datasheet – 1K Microwire Serial EEPROM

A Serial EEPROM (Electrically Erasable Programmable Read-Only Memory) is a type of non-volatile memory that can store data even when the power is turned off. It is used in a wide range of electronic devices to store configuration settings, calibration data, and other small amounts of non-volatile information.

Part Number: 93C46

Function: 1K Microwire Serial EEPROM

Package: 8-lead MSOP and 6-lead SOT-23 Type

Manufacturer: Microchip Technology

Images:93C46 pinout datasheet

Description

93C46 is 1K Microwire Serial EEPROM. The Microchip Technology Inc. 93AA46, 93LC46, 93C46, 93AA46A/B, 93LC46A/B & 93C46A/B are 1K low voltage serial Electrically Erasable PROMs (EEPROM). Generic memory devices such as the 93AA46, 93LC46 or 93C46 are dependent upon external logic levels driving the ORG pin to set word size. For dedicated 8-bit communication, the 93AA46A, 93LC46A or 93C46A devices are selected, while the 93AA46B, 93LC46B and 93C46B devices are selected for 16 bits. Advanced CMOS technology makes these devices ideal for low power, non-volatile memory applications. This 93XX Series is available in standard 8-lead MSOP and 6-lead SOT-23 packages.

Features

• Low power CMOS technology

• ORG pin for selectable memory configuration

• No org pin for dedicated word sizes
– 128 x 8-bit organization ‘A’ version devices
– 64 x 16-bit organization ‘B’ version devices

• Self-timed ERASE and WRITE cycles (including auto-erase)

• Automatic ERAL before WRAL

• Power on/off data protection circuitry

• Industry standard 3-wire serial I/O

• Device status signal during ERASE/WRITE cycles

• Sequential READ function

• 1,000,000 E/W cycles

• Data retention > 200 years

93C46 pdf memory

93C46 PDF Datasheet

880094 PDF Datasheet – 1575.42 MHz GPS L1 BAW Filter

Part Number: 880094

Function: 1575.42 MHz GPS L1 BAW Filter

Manufacturer: TriQuint Semiconductor

Images:880094 pdf pinout

Description

880094 is 1575.42 MHz GPS L1 BAW Filter. BAW stands for Bulk Acoustic Wave, and a BAW filter is a type of electronic filter used in radio frequency (RF) and wireless communication systems to selectively pass or reject specific frequency bands. BAW filters are based on the principle of utilizing acoustic waves propagating through a piezoelectric material to filter RF signals.

BAW filters have become increasingly popular in modern RF and wireless communication systems due to their excellent performance characteristics and ability to handle high-frequency bands. They are commonly used in various applications, including cellular phones, Wi-Fi devices, Bluetooth devices, GPS receivers, and other wireless communication devices.

 

Features

1. Usable bandwidth 25 MHz

2. Low loss

3. High selectivity

4. Single-ended operation

5. Ceramic chip-scale Package (CSP)

6. Small Size

7. Hermetic RoHS compliant, Pb-free

Functional Block Diagram I/O I/O GND Pin Configuration Overall width, length, and thickness are the only critical dimensions. All other dimensions are for reference only. Dimensions shown are nominal in millimeters All tolerances are 0.13mm except overall length and width 0.25mm Body: Sapphire Package: Alumina Terminations: Au plating 0.5 – 2.5 m, over a 2.0 – 6.0  m Ni plating Pin # SE-Balanced I/O GND Description Input/Output Ground Ordering Information Part No. 880094 880094 Eval Board Description packaged part evaluation board Data Sheet: Rev B 12/2011 © 2011 TriQuint Semiconductor, Inc. – 1 of 6 – Disclaimer: Subject to change without notice e Connecting the Digital World to the Global Network

[…]

880094 datasheet

Applications:

1. For GPS L1 Applications

2. For high-selectivity applications

880094 PDF Datasheet