STK412-030 PDF Datasheet – AF Power Amplifier

An AF (Audio Frequency) power amplifier is an electronic circuit designed to amplify audio signals to a level suitable for driving speakers or other output devices. These amplifiers are used in various audio applications, including home audio systems, public address systems, musical instruments, and more.

The primary function of an AF power amplifier is to take a low-power audio input signal and boost its power level to a level sufficient to drive a loudspeaker or other load. This enables the reproduction of sound at a higher volume while maintaining good audio quality.

Part Number: STK412-030

Function: Two-Channel Shift Power Supply Audio Power Amplifier IC

Package: SIP 18 Pin Type

Manufacturer: Sanyo Semiconductor

Images:STK412-030 datasheet pinout

Description

This is Two-Channel Shift Power Supply Audio Power Amplifier IC. The STK412-030, STK412-000 series are class H audio power amplifier hybrid ICs that feature a built-in shift power supply circuit. These ICs provide high efficiency audio power amplification by controlling (switching) the supply voltage supplied to the power transistors according to the detected level of the input audio signal.

Features

• Pin compatible IC series that covers power ratings from 50 W × 2 channels to 180 W × 2 channels at 0.7 or 0.8% THD, 20 Hz to 20 kHz. This allows the use of a common PCB for all output classes.

• The pin arrangement is also unified with that of the three-channel STK413-000 series. This means that PCBs designed for three-channel models can also be used for two-channel models.

• Miniature package — 50 W/ch to 120 W/ch (THD = 0.8%, f = 20 Hz to 20 kHz): 64 × 36.5× 8.5 mm- — 150 W/ch to 180 W/ch (THD = 0.7%, f = 20 Hz to 20 kHz): 78 × 44× 9 mm- – Not including the IC pins.

• Allowable load shorted time: 0.3s […]

STK412-030 pdf amplifier sanyo

STK412-030 PDF Datasheet

SF1533SG PDF Datasheet – PWM Power Switch

Part Number: SF1533SG

Function: PWM Power Switch

Package: SOP 8 Pin Type

Manufacturer: SiFirst Technology

Images:SF1533SG pdf

Description

SF1533SG is a high performance, high efficiency, highly integrated current mode PWM power switch for offline flyback converter applications. In SF1533SG, PWM switching frequency with shuffling is fixed to 50KHz and is trimmed to tight range. When the output power demands decrease, the IC decreases switching frequency based on the proprietary η -BalanceTM control to boost power conversion efficiency at the light load. When output power falls below a given value, the IC enters into burst mode and provides excellent efficiency without audio noise. The IC can achieve “Zero OCP/OPP Recovery Gap” using SiFirst’s proprietary control algorithm. Meanwhile, the OCP/OPP variation versus universal line input is compensated. The IC has built-in synchronized slope compensation to prevent sub-harmonic oscillation at high PWM duty output. The IC also has built-in soft start function to soften the stress on the MOSFET during power on period. SF1533SG integrates functions and protections of Under Voltage Lockout (UVLO), VCC Over Voltage Protection (OVP), Cycle-by-cycle Current Limiting (OCP), Pins Floating Protection, Over Load Protection (OLP), VCC Clamping, Leading Edge Blanking (LEB), etc. SF1533SG is available in SOP8 packages.

Pinouts:

SF1533SG pinout datasheet

Features

1. Built-in 600V Power MOSFET

2. Proprietary η -BalanceTM Control to Boost Light Load Efficiency

3. Proprietary “Zero OCP/OPP Recovery Gap” Control

4. Fixed 50KHz Switching Frequency

5. Built-in Soft Start Function

6. Very Low Startup Current

7. Frequency Reduction and Burst Mode Control for Energy Saving

8. Current Mode Control

9. Built-in Frequency Shuffling

10. Built-in Synchronous Slope Compensation

11. Cycle-by-Cycle Current Limiting

12. Built-in Leading Edge Blanking (LEB)

Applications:

1. AC/DC Adaptors

2. Open-frame SMPS

3. Set-Top Box Power Supplies

4. ATX Standby Power

 

SF1533SG PDF Datasheet