G40N60A4 PDF – 600V, IGBT, HGTG40N60A4

Part Number: G40N60A4

Function: 600V, N-Channel IGBT

Package: TO-247 Type

Manufacturer: Fairchild Semiconductor

Images:G40N60A4 pdf pinout

Description

G40N60A4 is 600V, SMPS Series N-Channel IGBT. The HGTG40N60A4 is a MOS gated high voltage switching device combining the best features of a MOSFET and a bipolar transistor. This device has the high input impedance of a MOSFET and the low on-state conduction loss of a bipolar transistor. The much lower on-state voltage drop varies only moderately between 25oC and 150oC. This IGBT is ideal for many high voltage switching applications operating at high frequencies where low conduction losses are essential. This device has been optimized for high frequency switch mode power supplies. Formerly Developmental Type TA49347.

Features:

• 100kHz Operation At 390V, 40A

• 200kHz Operation At 390V, 20A

• 600V Switching SOA Capability

• Typical Fall Time .55ns at TJ = 125

• Low Conduction Loss Packaging

[…]G40N60A4 datasheet igbt

IGBT stands for Insulated-Gate Bipolar Transistor. It is a type of power semiconductor device that combines the advantages of bipolar transistors (high voltage and current handling capability) and field-effect transistors (fast switching and low on-state resistance).

They are also used in applications where high voltage and high current are required, such as in welding equipment and induction heating.

An IGBT consists of a P-N-P-N structure with an insulated gate, which is used to control the flow of current between the emitter and collector terminals. When a positive voltage is applied to the gate terminal, it creates a conducting channel between the emitter and collector, allowing current to flow.

G40N60A4 PDF Datasheet

SP1848 PDF Datasheet – Thermoelectric Cooler

Part Number: SP1848

Function: Thermoelectric Cooler

Manufacturer: Marlow

Images:SP1848 pdf cooler

Description

SP1848 is Thermoelectric Cooler. A Thermoelectric Cooler (TEC), also known as a Peltier cooler, is a type of solid-state device that uses the phenomenon of thermoelectric effect to create a temperature difference between its two sides. It can be used for both cooling and heating purposes. The main principle behind a TEC is the Peltier effect, which is a phenomenon where a temperature difference is created when an electric current flows through a junction of two different conductors.

Performance Values:

Hot Side Temperature (°C) ∆ Tmax (°C-dry N2): Qmax (watts): Imax (amps): Vmax (vdc): AC Resistance (ohms): 27°C 62.0 21.3 9.36 3.48 0.323 50°C 70.6 23.6 9.24 3.88 — SP1848 Mechanical Characteristics 1.130 [28.70] 1.000 [25.4] 1.000 [25.4] Cold Side Negative Positive Hot Side Ceramic Material: Alumina (AC) Millimeters are in [ ] .192 [4.88] Ordering Options SP1848-00 SP1848-03 with out lead wire with 4” lead wire 102-0132, Rev A Thermoelectric Cooler Performance Curves Environment: One atmosphere dry nitrogen Hot Side Temperature: 27°C Hot Side Temperature: 50°C

For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, consult one of our Applications Engineers. Installation Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional information, please refer to our TEC Installation Guide. Operation Cautions For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method. Marlow Industries, Inc. 10451 Vista Park Road Dallas Texas […]

SP1848 datasheet

SP1848 PDF Datasheet