QCA100AA120 PDF – 1200V, Darlington Transistor

Part Number: QCA100AA120

Function: 1200V, Darlington Transistor

Package: Module Type

Manufacturer: SanRex Corporation

Images:QCA100AA120 pdf pinout

Description

A dual Darlington power transistor would integrate two Darlington transistor pairs into a single component. This integration provides the benefits of both Darlington pairs and power transistors. By combining the current amplification capabilities of Darlington pairs with the high-power handling capabilities of power transistors, this device can efficiently amplify and switch high-power signals.

Dual Darlington power transistors are used in various applications where high-current amplification or switching is required while maintaining a compact and integrated design. These applications could include audio amplifiers, motor control circuits, power regulators, and more.

QCA100AA120 is a dual Darlington power transistor module which has seriesconnected high speed, high power Darlington transistors. Each transistor has a reverse paralleled fast recovery diode. The mounting base of the module is electrically isolated from semiconductor elements for simple heatsink construction,

1. IC 100A, VCEX 1200V

2. Low saturation voltage for higher efficiency.

3. High DC current gain hFE Isolated mounting base

 

QCA100AA120 datasheet

Applications:

1. Motor Control VVVF, AC/DC Servo, UPS,

2. Switching Power Supply

Absolute maximum ratings ( Tj=25°C )

1. Collector to Base Voltage: Vcbo = 1200 V

2. Collector to Emitter Voltage: Vceo = 1200 V

3. Emitter to Base Voltage: Vebo = 10 V

4. Collector Current: Ic = 100 A

5. Total Dissipation: Pt = 800 W

6. Junction Temperature: Tj = -40 ~ 150°C

7. Storage Temperatue: Tsg = -40 ~ +125°C

 

QCA100AA120 PDF Datasheet

OM8378PS/N3/2 PDF – TV Signal Processor

Part Number: OM8378PS/N3/2

Function: TV signal processor- Closed Caption decoder

Package: DIP 64 Pin type

Manufacturer: Philips

Images:OM8378PS_N3_2 pdf

Description

The OM8373, OM8378PS/N3/2 and OM8378 combine the functions of a video processor together with a µ-Controller and US Closed Caption decoder. The ICs are intended to be used in economy television receivers with 110° picture tubes. The ICs have supply voltages of 8 V and 3.3 V and they are mounted in a SDIP-64 envelope. The features are given in the following feature list.

Features:

1. TV-signal processor

• Vision IF circuit suitable for negative modulation with alignment-free PLL demodulator • Internal (switchable) time-constant for the IF-AGC circuit • The mono intercarrier sound circuit has a selective FM-PLL demodulator which can be switched to the different FM sound frequencies (4.5/5.5/6.0/6.5 MHz). The quality of this system is such that the external band-pass filters can be omitted. • Source selection between the ‘internal’ CVBS and an external CVBS or Y/C signal • 1 external audio input. • Integrated chrominance trap circuit • Integrated luminance delay line with adjustable delay time • Picture improvement features with peaking (with switchable centre frequency, depeaking, variable positive/negative overshoot ratio and video dependent coring), dynamic skin tone control and blue- and black stretching. All features are available for CVBS, Y/C and YPBPR signals. • Tint control for all internal and external signals • Integrated chroma band-pass filter with switchable centre frequency • Only one reference (12 MHz) crystal required for the µ-Controller and the colour decoder • NTSC or PAL/NTSC colour decoder with automatic search system • Internal base-band delay line • Indication of the Signal-to-Noise ratio of the incoming CVBS signal • A linear RGB/YUV/YPBPR input with fast blanking for external RGB/YUV sources. The synchronisation circuit can be connected to the incoming Y signal. The OSD signals are internally supplied from the µ-Controller. • RGB control circuit with ‘Continuous Cathode Calibration’, white point and black level off-set adjustment so that the colour temperature of the dark and the light parts of the screen can be chosen independently. • 2 levels of contrast reduction of main picture possible during OSD/Text insertion (‘halftone’) • OSD/Text gain reduction control • Adjustable ‘wide blanking’ of the RGB outputs • Horizontal synchronization with two control loops and alignment-free horizontal oscillator • Vertical count-down circuit • Vertical driver optimized for DC-coupled vertical output stages • Horizontal and vertical geometry processing • Horizontal and v […]

OM8378PS datasheet pinout

OM8378PS/N3/2 PDF Datasheet