1200AP40 PDF Datasheet – PWM Controller – NCP1200AP40

Part Number: 1200AP40, NCP1200AP40

Function: PWM Current-Mode Controller

Package: SOIC 8, DIP 8 Pin Type

Manufacturer: ON Semiconductor

Images:1200AP40 pdf pinout

Description

1200AP40 is PWM Current−Mode Controller for Universal Off−Line Supplies Featuring Low Standby Power. A PWM (Pulse Width Modulation) Current-Mode Controller is an electronic device used in power electronic circuits to regulate the output current of a system by modulating the width of the output pulses. This type of controller is commonly used in applications such as switching power supplies, voltage regulators, motor drives, and other systems where precise control of the output current is required.

Housed in SOIC−8 or PDIP−8 package, the NCP1200A enhances the previous NCP1200 series by offering a reduced optocoupler current together with an increased drive capability. Due to its novel concept, the circuit allows the implementation of complete off−line AC−DC adapters, battery charger or a SMPS where standby power is a key parameter. […]

Features

• No Auxiliary Winding Operation

• Auto−Recovery Internal Output Short−Circuit Protection

• Extremely Low No−Load Standby Power

• Current−Mode Control with Skip−Cycle Capability

• Internal Temperature Shutdown

• Internal Leading Edge Blanking

• 250 mA Peak Current Capability

1200AP40 datasheet controller

Typical Applications:

• AC−DC Adapters for Portable Devices

• Offline Battery Chargers

• Auxiliary Power Supplies (USB, Appliances, TVs, etc.)

1200AP40 PDF Datasheet

7490 PDF Datasheet – Decade and Binary Counter

This post explains for the TTL.

The Part Number is 7490, DM7490.

The function of this TTL is Decade and Binary Counter.

The pacakge is 14 Pin Type

Manufacturer: Fairchild Semiconductor

Preview images :

1 page
7490 pdf pinout

Description

7490 is Decade and Binary Counter. This is a popular integrated circuit (IC) from the 74xx series of logic devices. It is a decade counter and binary counter IC that can be used in various digital counting and frequency division applications. The 7490 has four synchronous decade (BCD) counters in a single package, which means it can count in decimal (base-10) and binary (base-2) modes.

Block Diagram
7490 datasheet ttl

1. Binary Counting: In binary counting, each count represents a unique binary number. For example, in a 3-bit binary counter, the counts will go from 000 (binary for 0) to 111 (binary for 7) before rolling over to 000 again. Binary counters are widely used in digital systems and microcontrollers for various purposes, including sequencing, addressing, and timing.

2. Decade (BCD) Counting: In decade counting, each count represents a unique decimal digit, ranging from 0 to 9. The primary use of BCD counters is for applications that require direct display or processing of decimal numbers. For example, in a 4-bit BCD counter, the counts will go from 0000 (BCD for 0) to 1001 (BCD for 9) before rolling over to 0000 again.

This TTL IC can be used in a variety of digital counting applications, such as frequency dividers, digital timers, and event counters.

7490 PDF Datasheet