LTA804N Datasheet – HV start-up DCM/QR flyback controller

Part Number: LTA804N

Package: SOP 16 Pin Type

Manufacturer: NXP, Philips

Image:

LTA804N image

LTA804N is Equivalent to TEA1751LT.

The TEA1751LT is the third generation of green Switched Mode Power Supply (SMPS)
controller ICs. The TEA1751LT combines a controller for Power Factor Correction (PFC)
and a flyback controller. Its high level of integration allows the design of a cost-effective
power supply with a very low number of external components.

The special built-in green functions provide high efficiency at all power levels. This
efficiency applies to quasi-resonant operation at high-power levels, quasi-resonant
operation with valley skipping, as well as reduced frequency operation at lower power
levels. At low-power levels, the PFC switches off to maintain high efficiency.
During low-power conditions, the flyback controller switches to frequency reduction mode
and limits the peak current to 25 % of its maximum value. This mode ensures high
efficiency at low-power and good standby power performance while minimizing audible
noise from the transformer.

The TEA1751LT is a Multi-Chip Module, (MCM), containing two chips. The proprietary
high-voltage BCD800 process which makes direct start-up possible from the rectified
universal mains voltage in an effective and green way. The second low voltage
Silicon On Insulator (SOI) is used for accurate, high speed protection functions and
control.

The TEA1751LT enables the design of highly efficient and reliable supplies with power
requirements of up to 250 W using the minimum number of external components.

LTA804N Datasheet

LTA804N Datasheet

Datasheet Download : [ TEA1751.PDF ]

74HC14 Datasheet – Hex inverting Schmitt trigger – NXP

Part Number: 74HC14, 74HCT14, 7414

Function: Hex inverting Schmitt trigger

Package: 14 Pin type

Manufacturer: NXP

Image

74hc14-hex-inverting-schmitt-trigger

Description

The Device is a high-speed Si-gate CMOS device and is pin compatible with Low-power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard No. 7A. The Device provides six inverting buffers with Schmitt-trigger action. It is capable of transforming slowlychanging input signals into sharply defined, jitter-free output signals.

 

74HC14 Pinout

74HC14 Datasheet pinout

Features

1. Complies with JEDEC standard no. 7A

2. Low-power dissipation
Applications

1. Wave and pulse shapers
2. Astable multivibrators
3. Monostable multivibrators

 

74HC14 Datasheet

74HC14 pdf


 

Related articles across the web