Pinout Archives - Page 312 of 3349

This post explains for the Audio Amplifier.

An audio amplifier is an electronic device or circuit that increases the amplitude (strength) of audio signals, such as those coming from microphones, musical instruments, or audio sources like MP3 players and CD players. The primary function of an audio amplifier is to make the audio signal powerful enough to drive speakers or headphones and produce sound at audible levels.

Audio amplifiers are essential components in various applications, from personal audio devices to public address systems and professional audio setups.

The Part Number is MC4863.

The function of this semiconductor is Dual 2.2W Audio Amplifier Plus Stereo Headphone Function.

Manufacturer: MegaPower

Preview images : MC4863 datasheet amplifier

Description

The MC4863 is a dual bridge-connected audio power amplifier which, when connected to a 5V supply, will deliver 2.2W to a 4 Ω load(No t e 1) or 2.5W to a 3 Ω load(No t e 2) with less than 1.0% THD+N. In addition, the headphone input pin allows the amplifiers to operate in single-ended mode to drive stereo headphones. Boomer audio power amplifiers were designed specifically to provide high quality output power from a surface mount package while requiring few external components,to simplify audio system design, it combines dual bridge speaker amplifiers and stereo headphone amplifiers on one chip. The MC4863 features an externally controlled, low-power consumption shutdown mode, a stereo headphone amplifier mode, and thermal shutdown protection. It also utilizes circuitry to reduce “clicks and pops” during device turn-on. […]

Features

1. Stereo headphone amplifier mode

2. “Click and pop” suppression circuitry

3. Unity-gain stable

4. Thermal shutdown protection circuitry

MC4863 pdf pinout

Applications:

1. Multimedia monitors

2. Portable and desktop computers

3. Portable televisions

MC4863 PDF Datasheet

Description

The Atheros AR9344-DC3A is a highly integrated and feature-rich IEEE 802.11n 2×2 2.4/5 GHz Systemon-a-Chip (SoC) for advanced WLAN platforms. It includes a MIPS 74Kc processor, PCI Express 1.1 Root Complex and Endpoint interfaces, five port IEEE 802.3 Fast Ethernet Switch with MAC/ PHY, one MII/RMII/RGMII interface, one USB 2.0 MAC/PHY, and external memory interface for serial Flash, SDRAM, DDR1 or DDR2, I2S/ SPDIF-Out audio interface, SLIC VOIP/PCM interface, two UARTs, and GPIOs that can be used for LED controls or other general purpose interface configurations.

The AR9344-DC3A supports 802.11n operations up to 144 Mbps for 20 MHz and 300 Mbps for 40 MHz respectively, and 802.11a/b/g data rates. Additional features include Maximal Likelihood (ML) decoding, Low-Density Parity Check (LDPC), Maximal Ratio Combining (MRC), Tx Beamforming (TxBF), and On-Chip One-Time Programmable (OTP) memory.

Features

1. 74Kc MIPS processor with 64 KB I-Cache and 32 KB D-Cache, operating at up to 533 MHz

2. External 16- or 32-bit DDR1, DDR2 operating at up to 200 MHz (400 M transfers/sec), or 16-
bit SDRAM memory interface operating at up to 200 MHz

3. NAND and SPI NOR Flash memory support

4. 10/100 Ethernet Switch with five IEEE 802.3 Ethernet LAN ports

5. MII/RMII/RGMII interface

6. 802.3az Energy Efficient Ethernet compliant

7. Hardware-based NAT & ACL accelerators for Ethernet interface

Pinout

MC4863 PDF Datasheet – Dual 2.2W Audio Amplifier

Description

Features

MC4863 PDF Datasheet

AR9344-DC3A PDF – IEEE 802.11n 2×2 2.4/5 GHz – Atheros

Description

Features

AR9344-DC3A PDF Datasheet