Pinout

CBB61 Datasheet PDF – AC Metallized Film Capacitor

Posted on by pinout

Part Number: CBB61

Function: AC Metallized Film Capacitor

Manufacturer: DA Hua, WesTech Component

Images:CBB61 datasheet

Description

The CBB61 is Metallized Polypropylene Film Capacitor. An AC metallized film capacitor is a type of capacitor designed for use in alternating current (AC) circuits. It is constructed using metallized film as the dielectric material, similar to what was described in the previous answer.

However, the distinguishing feature of an AC metallized film capacitor is that it is specifically engineered to perform well in AC applications, which often require different characteristics compared to direct current (DC) applications.

Features

1. enclosed in ABS plastic case filled with epoxy resin, is of excellent self healing
starting and running circuits at 50Hz (60Hz)

Applications:

1. These capacitors find applications in various AC systems, including power factor correction, motor run capacitors for AC motors, and lighting ballasts, among others.

Technical Specification：

Type Ambient Temperaturre Rated voltage Rated Test voltage Insulation Dissipation Factor capacitance Resistance （℃） （VAC） （μF） （VAC） T-T:1.5Un/60S -40~+70℃ CBB61 -40~+85℃ T-C:2000VAC/60S  Executing Standards：GB3667-91；UL810；VDE EN60252（IEC60252） ±5% Capacitance Tolerance：±5% or according with the request of customers MPP: T-T:≥3000S tgδ≤ 0.002(100Hz) MPET: T-C:≥1000MΩ tgδ≤ 0.005(100Hz) 1.75Un/10S 250~630 0.4~20 2Un/2S Da Hua (Hong Kong) Development Co. Address: G/F 397 Shanghai Street, Mongkok, Hong Kong

Note：Exceptional specifications can be produced on consultation。 Da Hua (Hong Kong) Development Co. Address: G/F 397 Shanghai Street, Mongkok, Hong Kong Tel:852 26269193 Fax:852 26269229 Email:sales@dahuahk.com Website:www.dahuahk.com […]

 

CBB61 Datasheet

NAS1352 PDF Datasheet – Socket Head Cap Screw

Posted on by pinout

Part Number: NAS1352

Function: Socket Head Cap Screw

Manufacturer: GAH ( Genuine Aircraft Hardware )

Images:NAS1352 datasheet

Description

NAS1352 is Socket Head Cap Screw. A socket head cap screw, often simply referred to as a “socket cap screw” or “Allen screw,” is a type of threaded fastener designed with a cylindrical head and a recessed internal hexagonal socket (also known as an Allen socket) on its top. These screws are commonly used in various applications where a low-profile fastener is needed, and where a wrench or Allen key can be used to tighten or loosen them.

NAS1351 (Fine) and NAS1352(Coarse) Socket Head Cap Screws Genuine Aircraft Hardware Co. Then to designate material add a( – ) for Alloy Steel 180KSI, or a ( C ) for Corrosion Resistant Steel (18-8) 80KSI, or an ( N ) 140-160KSI for Heat Resisting Steel per AMS5731 or 5737 (A286). After the ( – , C, or N) for material, place the Diameter Designation for your desired Shank Diameter that corresponds with your desired Thread Size. After all that but before the Length add Features if desired. After features (if any) then the Overall Features for rotational security. Length is stated in 1/16ths of an inch. The last ( H ) for Drilled Head, or designation is for plating or finish. P= Cadmium II Plating Type 2, class 2, All materials ( LE ) for self locking element any type ( LL ) for self locking element Strip Type S= Silver Flashed for ( C ) and ( N ) materials. ( LN ) for self locking element Pellet Type No Suffix = Black oxide for (Alloy Steel) and Passivated for ( C ) and ( N ) Materials Socket Head Cap Screw, 1/4-28 Threads, Alloy Steel, Holes in Head , 7/8” Overall Length, Black Oxide Coated.

NAS1352 pdf screw

HELP WITH THE SELECTION OF PART NUMBERS :

The four numbers after “NAS” denote “Fine” or “Course” Threads Lengths may be requested that are less than “Thread Length Min”, they will just be fully threaded DataShee ( LB ) for self locking element Patch Type Example of Part Number: NAS1351-4H14 Documents in this book for REFERENCE ONLY, not intended for design. Not guaranteed for accuracy. 22 All Original Text, Tables and Drawings are Copyright © by Genuine Aircraft Hardware Co. 2005 […]

NAS1352 PDF Datasheet