Texas Instruments Archives - Page 57 of 128

Part Number: WS78L05

Function: Positive Voltage Regulator

Package: SO-8, TO-92, SOT-89 Type

Manufacturer: Wing Shing

Image :

Features

1. 3-Terminal Regulators
2. Output Current up to 100 mA
3. No External Components
4. Internal Thermal-Overload Protection
5. Internal Short-Circuit Current Limiting
6. Provided Pb-Free packages from the end of 2004

Pinout

Description

This series of fixed-voltage integrated-circuit voltage regulators is designed for a wide range of applications. These applications include on-card regulation for elimination of noise and distribution problems associated with single-point regulation. In addition, they can be used with power-pass elements to make high-current voltage regulators. One of these regulators can deliver up to 100 mA of output current. The internal limiting and thermal-shutdown features of these regulators make them essentially immune to overload. When used as a replacement for a zener diode-resistor combination, an effective improvement in output impedance can be obtained, together with lower bias current.

Features

WS78L05 Datasheet PDF Download

Part Number: LM3914

Function: Dot/Bar Display Driver

Manufacturer: Texas Instruments

Pinouts:

LM3914 datasheet

Description

The LM3914 is a monolithic integrated circuit that senses analog voltage levels and drives 10 LEDs, providing a linear analog display. A single pin changes the display from a moving dot to a bar graph. Current drive to the LEDs is regulated and programmable, eliminating the need for resistors. This feature is one that allows operation of the whole system from less than 3V. The circuit contains its own adjustable reference and accurate 10-step voltage divider. The low-bias-current input buffer accepts signals down to ground, or V−, yet needs no protection against inputs of 35V above or below ground. The buffer drives 10 individual comparators referenced to the precision divider. Indication non-linearity can thus be held typically to ½%, even over a wide temperature range.

Versatility was designed into the LM3914 so that controller, visual alarm, and expanded scale functions are easily added on to the display system. The circuit can drive LEDs of many colors, or low-current incandescent lamps. Many LM3914s can be “chained” to form displays of 20 to over 100 segments. Both ends of the voltage divider are externally available so that 2 drivers can be made into a zero-center meter. The LM3914 is very easy to apply as an analog meter circuit. A 1.2V full-scale meter requires only 1 resistor and a single 3V to 15V supply in addition to the 10 display LEDs. If the 1 resistor is a pot, it becomes the LED brightness control. The simplified block diagram illustrates this extremely simple external circuitry.

Features

1. Drives LEDs, LCDs or Vacuum Fluorescents
2. Bar or Dot Display Mode Externally Selectable by User
3. Expandable to Displays of 100 Steps
4. Internal Voltage Reference from 1.2V to 12V
5. Operates with Single Supply of Less than 3V
6. Inputs Operate Down to Ground
7. Output Current Programmable from 2 mA to 30 mA
8. No Multiplex Switching or Interaction Between Outputs
9. Input Withstands ±35V without Damage or False Outputs
10 .LED Driver Outputs are Current Regulated, Open-collectors
11. Outputs can Interface with TTL or CMOS Logic
12. The Internal 10-step Divider is Floating and can be Referenced to a Wide Range of Voltages

Official Homepage: https://www.ti.com/product/LM3914

LM3914 Datasheet PDF

Other data sheets are available within the file: LM3914N, LM3914N-1, LM3914N-1/NOPB, LM3914V