2062C Datasheet PDF – JFET-input Operational Amplifier

Marking : 2062C, Part Number: TLE2062CDR

Function: Dual JFET-Input High-Output-Drive µPower Operational Amplifier

Package: SOIC 8 Pin Type

Manufacturer: Texas Instruments

Pinouts:

2062C datasheet pinout

Description

The TLE206x series of low-power JFET-input operational amplifiers doubles the bandwidth of the earlier generation TL06x and TL03x BiFET families without significantly increasing power consumption. Texas Instruments Excalibur process also delivers a lower noise floor than the TL06x and TL03x. On-chip zener trimming of offset voltage yields precision grades for dc-coupled applications.

BiFET operational amplifiers offer the inherently-higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes them better suited for interfacing with high-impedance sensors or low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.

Features

1. 2×Bandwidth (2 MHz) of the TL06x and TL03x Operational Amplifiers
2. Low Supply Current … 290 µA/Ch Typ
3. On-chip Offset Voltage Trimming for Improved DC Performance
4. High Output Drive, Specified into 100-Ω Loads
5. Lower Noise Floor Than Earlier Generations of Low-Power BiFETs

Other data sheets are available within the file: TLE2062CD, TLE2062CDRG4

2062C Datasheet PDF Download


2062C pdf

Related articles across the web

INA271 Datasheet – Voltage Output Current Shunt Monitor – TI

Part Number: INA271

Function: Voltage Output, Unidirectional Measurement Current-Shunt Monitor

Package: SOIC 8 Pin Type

Manufacturer: TI

Image :

INA271 image

Description

The INA270 and INA271 family of voltage-output, current-sense amplifiers can sense drops across shunt resistors at common-mode voltages from –16 V to +80 V, independent of the supply voltage. The INA270 and INA271 pinouts readily enable filtering. The INA270 and INA271 are available with two gain options: 14 V/V and 20 V/V. The 130-kHz bandwidth simplifies use in current-control loops.

Pinout:

INA271 datasheet pinout

Features

1. Wide Common-Mode Range: –16 V to +80 V
2. CMRR: 120 dB
3.  Accuracy:
±0.5-mV Offset (typ)
±0.2% Gain Error (typ)
2.5 μV/°C Offset Drift (typ)
50 ppm/°C Gain Drift (max)
4. Bandwidth: Up to 130 kHz
5.  Two Gain Options Available:

Official Homepage: https://www.ti.com/product/INA271

INA271 Datasheet PDF Download


 

Related articles across the web