Texas Instruments Archives - Page 62 of 128

Description

The TLE206x series of low-power JFET-input operational amplifiers doubles the bandwidth of the earlier generation TL06x and TL03x BiFET families without significantly increasing power consumption. Texas Instruments Excalibur process also delivers a lower noise floor than the TL06x and TL03x. On-chip zener trimming of offset voltage yields precision grades for dc-coupled applications.

BiFET operational amplifiers offer the inherently-higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes them better suited for interfacing with high-impedance sensors or low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.

Features

1. 2×Bandwidth (2 MHz) of the TL06x and TL03x Operational Amplifiers
2. Low Supply Current … 290 µA/Ch Typ
3. On-chip Offset Voltage Trimming for Improved DC Performance
4. High Output Drive, Specified into 100-Ω Loads
5. Lower Noise Floor Than Earlier Generations of Low-Power BiFETs

Other data sheets are available within the file: TLE2062CD, TLE2062CP, TLE2062ID

Part Number: NE5534AP

Function: NE5534x, SA5534x Low-Noise Operational Amplifiers

Manufacturer: Texas Instruments

Image:

Pinouts:

NE5534AP datasheet

Description

The NE5534, NE5534A, SA5534, and SA5534A devices are high-performance operational amplifiers combining excellent dc and ac characteristics. Some of the features include very low noise, high output-drive capability, high unity-gain and maximum-output swing bandwidths, low distortion, and high slew rate.

These operational amplifiers are compensated internally for a gain equal to or greater than three. Optimization of the frequency response for various applications can be obtained by use of an external compensation capacitor between COMP and COMP/BAL.

Schematic
NE5534AP Schematic
Features

1. Equivalent Input Noise Voltage 3.5 nV/√Hz Typ
2. Unity-Gain Bandwidth 10 MHz Typ
3. Common-Mode Rejection Ratio 100 dB Typ
4. High DC Voltage Gain 100 V/mV Typ
5. Peak-to-Peak Output Voltage Swing 32 V Typ With V CC ± = ± 18 V and R L = 600 Ω
6. High Slew Rate 13 V/μs Typ

NE5534AP Block Diagram

Official Homepage: https://www.ti.com/product/NE5534A

NE5534AP Datasheet PDF Download

Other data sheets are available within the file: 5534A, SA5534A, NE5534, SA5534AP