DAC5672A Datasheet – 14-bit, High-speed DAC ( PDF )

Part Number: DAC5672A

Function: DUAL, 14-BIT 275 MSPS DIGITAL-TO-ANALOG CONVERTER

Package: 48-Pin Thin-Quad Flat Pack (TQFP) Type

Manufacturer: Texas Instruments

Pinouts:

DAC5672A datasheet

 

Description

The DAC5672 is a monolithic, dual-channel, 14-bit, high-speed DAC with on-chip voltage reference. Operating with update rates of up to 275 MSPS, the DAC5672A offers exceptional dynamic performance, tight-gain, and offset matching characteristics that make it suitable in either I/Q baseband or direct IF communication applications. Each DAC has a high-impedance, differential-current output, suitable for single-ended or differential analog-output configurations. External resistors allow scaling the full-scale output current for each DAC separately or together, typically between 2 mA and 20 mA. An accurate on-chip voltage reference is temperature-compensated and delivers a stable 1.2-V reference voltage. Optionally, an external reference may be used.

The DAC5672A has two, 14-bit, parallel input ports with separate clocks and data latches. For flexibility, the IC also supports multiplexed data for each DAC on one port when operating in the interleaved mode. The DAC5672A has been specifically designed for a differential transformer-coupled output with a 50-Ω doubly-terminated load. For a 20-mA full-scale output current, both a 4:1 impedance ratio (resulting in an output power of 4 dBm) and 1:1 impedance ratio transformer (–2 dBm output power) are supported.

Features

• 14-Bit Dual Transmit Digital-to-Analog Converter (DAC)
• 275 MSPS Update Rate
• Single Supply : 3 V to 3.6 V
• High Spurious-Free Dynamic Range (SFDR) : 84 dBc at 5 MHz
• High Third-Order Two-Tone Intermodulation
(IMD3): 79 dBc at 15.1 MHz and 16.1 MHz
• WCDMA Adjacent Channel Leakage Ratio (ACLR) : 78 dB at Baseband
• WCDMA ACLR: 73 dB at 30.72 MHz
• Independent or Single Resistor Gain Control
• Dual or Interleaved Data
• On-Chip 1.2-V Reference
• Low Power : 330 mW
• Power-Down Mode : 9 mW

The DAC5672 is available in a 48-pin TQFP package. Pin compatibility between family members provides 12-bit (DAC5662) and 14-bit (DAC5672A) resolution. Furthermore, the DAC5672A is pin compatible to the DAC2904 and AD9767 dual DACs. The device is characterized for operation over the industrial temperature range of -40°C to 85°C.

Other data sheets are available within the file:

DAC5672AIPFB, DAC5672AIPFBG4, DAC5672AIPFBR, DAC5672AIPFBRG4

 

DAC5672A Datasheet PDF Download


DAC5672A pdf