GC0351P Speaker – 1W, 8 Ohm, 16 mm x 35 mm

Part Number: GC0351P

Function: Speaker, 16 mm x 35 mm, Square Frame, 1.0 W, 8 Ohm

Manufacturer: CUI ( http://www.cui.com )

Image:

GC0351P datasheet

 

Description

A 1W, 8Ohm speaker is a type of audio transducer that is designed to produce sound with a maximum power output of 1 watt, at an impedance of 8 ohms. This type of speaker is commonly used in low-power audio applications such as small portable speakers, headphones, and earbuds.

The power rating of a speaker refers to the maximum amount of power that it can handle before it starts to distort or get damaged. A 1W speaker is designed to handle a maximum power of 1 watt, which means that it can handle lower power levels with ease.

PART NUMBER: GC0351P-3

FREQUENCY RESPONSE CURVE
potentiometer range 50 dB
rectifier RMS
lower limit frequency 20 Hz
wr. speed 100 mm/sec

parameter conditions/description min typ max units

nominal size 16 x 35 mm

impedance at 1.2 kHz, 1 V 6.8 8 9.2 Ω

resonant frequency at 1 V 440 550 660 Hz

sound pressure level 1 W, 50 cm ave., at 0.6, 0.8, 1, 1.2 kHz 77 80 83 dB

response 10 dB max. Fo 13,000 Hz

input power 1 2 W

operation must be normal at program source 1 W

buzz, rattle, etc. must be normal at sine wave 2.83 Vdc

magnet size: 8.0 x 2.0 mm

load test 24 hours of white noise at 1 W

heat test 20 ~ 50% RH for 24 hours 63 65 67 °C

humidity test 90 ~ 95% RH for 24 hours 38 40 42 °C

Other data sheets are available within the file: GC0351

 

GC0351P Datasheet PDF Download


GC0351P pdf