MAX1742 Datasheet – Step-Down Regulator

Part Number: MAX1742

Function: 1A/2.7A / 1MHz / Step-Down Regulator

Package: 16-pin QSOP Type

Manufacturer: Maxim Integrated


MAX1742 datasheet



The MAX1742/MAX1842 constant-off-time, pulse-width modulated (PWM) step-down DC-DC converters are ideal for use in 5V and 3.3V to low-voltage conversion necessary in notebook and subnotebook computers. These devices feature internal synchronous rectification for high efficiency and reduced component count. They require no external Schottky diode. The internal 90mΩ PMOS power switch and 70mΩNMOS synchronous-rectifier switch easily deliver continuous load currents up to 1A.

The MAX1742/MAX1842 produce a preset 2.5V, 1.8V, or 1.5V output voltage or an adjustable output from 1.1V to VIN. They achieve efficiencies as high as 95%. The MAX1742/MAX1842 use a unique current-mode, constant-off-time, PWM control scheme, which includes Idle Mode™ to maintain high efficiency during light-load operation. The programmable constant-off-time architecture sets switching frequencies up to 1MHz, allowing the user to optimize performance trade-offs between efficiency, output switching noise, component size, and cost. Both devices are designed for continuous output currents up to 1A. The MAX1742 uses a peak current limit of 1.3A (min) and is suitable for applications requiring small external component size and high efficiency.

The MAX1842 has a higher current limit of 3.1A (min) and is intended for applications requiring an occasional burst of output current up to 2.7A. Both devices also feature an adjustable soft-start to limit surge currents during startup, a 100% duty cycle mode for low-dropout operation, and a low-power shutdown mode that disconnects the input from the output and reduces supply current below 1µA.


1. ±1% Output Accuracy

2. 95% Efficiency

3. Internal PMOS and NMOS Switches
(1) 90mΩ On-Resistance at VIN = 4.5V
(2) 110mΩ On-Resistance at VIN = 3V

4. Output Voltage
(1) 2.5V, 1.8V, or 1.5V Pin Selectable
(2) 1.1V to VIN Adjustable

5. 3V to 5.5V Input Voltage Range

6. 600μA (max) Operating Supply Current

7. <1μA Shutdown Supply Current

8. Programmable Constant-Off-Time Operation

9. 1MHz (max) Switching Frequency

10. Idle-Mode Operation at Light Loads

11. Thermal Shutdown

12. Adjustable Soft-Start Inrush Current Limiting

13. 100% Duty Cycle During Low-Dropout Operation

14. Output Short-Circuit Protection

Other data sheets are available within the file:

MAX1742EEE, MAX1742EEE+, MAX1842,MAX1842EEE


MAX1742 Datasheet PDF Download

MAX1742 pdf