Part Number: MAX3223E
Function: MULTICHANNEL RS-232 LINE DRIVER/RECEIVER WITH ±15-kV ESD PROTECTION
Package: SOIC, SSOP 20 Pin Type
Manufacturer: Texas Instruments
Pinouts:
Description
The MAX3223E consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The device operates at typical data signaling rates up to 500 kbit/s and a maximum of 30-V/μs driver output slew rate.
Features
• ESD Protection for RS-232 Bus Pins
(1) ±15-kV Human-Body Model (HBM)
(2) ±8-kV IEC61000-4-2, Contact Discharge
(3) ±15-kV IEC61000-4-2, Air-Gap Discharge
• Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards
• Operates With 3-V to 5.5-V VCC Supply
• Operates up to 500 kbit/s
• Two Drivers and Two Receivers
• Low Standby Current . . . 1 μA Typ
• External Capacitors . . . 4 × 0.1 μF
• Accepts 5-V Logic Input With 3.3-V Supply
• Alternative High-Speed Pin-Compatible Device(1 Mbit/s) for SNx5C3223E
Applications:
• Battery-Powered Systems
• PDAs
• Notebooks
• Laptops
• Palmtop PCs
• Hand-Held Equipment
MAX3223E Datasheet PDF Download
Other data sheets are available within the file:
MAX3223, MAX3223ECDB, MAX3223ECDBR, MAX3223ECDBRG4, MAX3223ECDW