ICR18650 Datasheet PDF – 3.7V, 2600mAh, Battery – Samsung

Part Number: ICR18650

Function: Lithium 18650 Rechargeable Cell, 3.7V 2600mAh

Cell Dimension : Diameter(max.) : Φ 18.40 mm, Height(max.) : 65.00 mm

Manufacturer: Samsung

Images

ICR18650 samsung datasheet

Description

This product specification has been prepared to specify the rechargeable lithium-ion cell
(‘cell’) to be supplied to the customer by Samsung SDI Co., Ltd.

Nominal Specifications

1. Nominal Capacity : 2600mAh (0.2C, 2.75V discharge)
2. Charging Voltage : 4.2 ± 0.05 V
3. Nominal Voltage : 3.7V
4. Charging Method : CC-CV (constant voltage with limited current)
5. Charging Current
(1) Standard charge : 1300mA
(2) Rapid charge : 2600mA
6. Charging Time
(1) Standard charge : 3hours
(2) Rapid charge : 2.5hours
7. Max. Charge Current : 2600mA
8. Max. Discharge Current : 5200mA
9. Discharge Cut-off Voltage : 2.75V
10. Cell Weight : 47.0g max
11. Cell Dimension
(1) Diameter(max.) : Φ 18.40 mm
(2) Height(max.) : 65.00 mm
12. Operating Temperature
(1) Charge : 0 to 45°C
(2) Discharge : -20 to 60°C
13. Storage Temperature
(1) 1 year: -20~25°C
(2) 3 months: -20~45°C
(3) 1 month: -20~60°C

Characteristics

1. Standard Charge
This “Standard Charge” means charging the cell with charge current 1300mA and constant voltage 4.2V at 25°C for 3hours.

2. Standard Discharge Capacity
The standard discharge capacity is the initial discharge capacity of the cell, which is
measured with discharge current of 520mA with 2.75V cut-off at 25℃ within 1hour
after the standard charge. Standard Discharge Capacity ≥ 2550mAh

3. Initial internal impedance
Initial internal impedance measured at AC 1kHz after rated charge. Initial internal impedance ≤ 100mΩ

Other data sheets are available within the file: ICR18650-26F

ICR18650 Datasheet PDF

ICR18650 pdf

MIP2C2 Datasheet PDF – IPD for Battery Charger – Panasonic

Part Number: MIP2C2

Function: High-Performance IPD for Battery Charger

Package: DIP 8 Pin Type

Manufacturer: Panasonic Corporation

Pinouts:

MIP2C2 datasheet

Description

MIP2C2 is a high-performance IPD designed for 7W battery chargers. It features built-in protection circuits necessary for compact power source charger circuitry. This allows a significant reduction in externally connected parts. MIP2C2 provides PWM control when a normal load is applied and intermittent control with low load. This results in greater efficiency for very low to maximum loads, while also conserving power during standby.

Features

1. Built-in charge protection circuit
2. Built-in overcurrent, overheating, load shorting and overvoltage protection circuits
3. Significantly reduced power consumption with no load : 20mW at 100VAC, 25mW at 240VAC
4. High efficiency with rated load : 75% at 100VAC,72% at 240VAC
5. Reduced number of parts (12 less than conventional Panasonic models)

Absolute Maximum Ratings

1. Drain voltage : VD = 700 V
2. Supply voltage : VCC = 30 V
3. Feedback voltage : VFB = 7 V
4. CL terminal voltage : VCL = 7 V
5. Drain current: ID = 500 V

 Applications

1. Chargers (for cellular phones, etc. )

Other data sheets are available within the file: MIP2C

MIP2C2 Datasheet PDF Download


MIP2C2 pdf