ICR18650-24E – Lithium-ion Rechargeable Cell – Samsung SDI

Part Number: ICR18650-24E

Function: Lithium-ion Rechargeable Cell

Manufacturer: Samsung SDI

Image :
ICR18650-24E rechargeable cell

Description

Nominal Specifications
1. Nominal Capacity : 2400mAh (0.2C, 2.75V discharge)
2. Minimum Capacity : 2350mAh(0.2C, 2.75V discharge)
3. Charging Voltage  : 4.2 ±0.05 V
4. Nominal Voltage : 3.7V
5. Discharge Cut-off Voltage : 2.75V
6. Cell Weight : 47.0g max

 

Characteristics
1. Standard Charge
This “Standard Charge” means charging the cell with charge current 1200mA and constant voltage 4.2V at 25℃for 3hours.

2. Standard Discharge Capacity
The standard discharge capacity is the initial discharge capacity of the cell, which is measured with discharge current of 480mA with 2.75V cut-off at 25℃ within 1 hour after the standard charge. Standard Discharge Capacity  ≥2330mAh

3. Initial internal impedance
Initial internal impedance measured at AC 1kHz after rated charge. Initial internal impedance  ≤100mΩ

4. Temperature Dependence of Discharge Capacity
Capacity comparison at each temperature, measured with discharge constant current 480mA and 2.75V cut-off after the standard charge is  as follows.

Outline Dimensions

ICR18650-24E datasheet outline

ICR18650-24E Datasheet PDF


 

Related articles across the web

MIP2F3 Datasheet – High-performance IPD for Battery Charger

Part Number: MIP2F3

Function : High-performance IPD designed for 20W battery charger

Package : DIP 7 Pin Type

Manufacturer: Panasonic

Image

MIP2F3 datasheet

Description

MIP2F×series is a high-performance IPD designed for 20W battery chargers. It features built-in protection circuits necessary for compact power source charger circuitry. This allows a significant reduction in externally connected parts.

It provides PWM control when a normal load is applied and intermittent control with low load. This results in greater efficiency for very low to maximum loads, while also conserving power during standby.

Features

1. Reduction of input voltage dependency
2. Significantly reduce no-load power consumption
(At 100 V AC input: 20 mW, at 240 V AC input: 20 mW)
3. Built-in protection function required for charger circuit

Pinout

MIP2F3 pinout

Application

1. Charger (for mobile phone)
2. AC adapter

Other data sheets are available within the file: MIP2F30MTSCF, MIP2F30MT, MIP2F30

MIP2F3 Datasheet

MIP2F3 pdf


 

Related articles across the web