ICS574M Datasheet PDF – PLL-based Zero Delay Buffer

Part Number: ICS574M

Function: Zero delay, low skew buffer

Package: SOIC 8 Pin Type

Manufacturer: Integrated Circuit Systems

Pinouts:

ICS574M datasheet

Description

The ICS574M is a low jitter, low-skew, high performance PLL-based zero delay buffer for high speed applications. Based on IDT’s proprietary low jitter Phase Locked Loop (PLL) techniques, the device provides four low skew outputs at speeds up to 160 MHz at 3.3 V.

Features

• Packaged in 8 pin narrow SOIC, Pb (lead) free availabl

• Zero input-to-output delay

• Four 1X outputs

• Output to output skew is less than 150 ps

• Output clocks up to 160 MHz at 3.3 V

• External feedback path for output edge placement

• Spread Smart™ technology works with spread spectrum clock generators

• Full CMOS outputs with 18 mA output drive capability a TTL levels at 3.3 V

• Advanced, low power, sub-micron CMOS process

• Operating voltage from 3.0 to 5.5 V

Other data sheets are available within the file:

ICS574MLFT, ICS574MI, ICS574MT, ICS9112BM-18T

 

ICS574M Datasheet PDF Download


ICS574M pdf

SN74ALVTH16827VR Datasheet PDF – 20-Bit Buffer / Driver

Part Number: SN74ALVTH16827VR

Function: 2.5-V/3.3-V 20-BIT BUFFERS/DRIVERS WITH 3-STATE OUTPUTS

Package: TVSOP 56 Pin Type

Manufacturer: Texas Instruments

Pinouts:

SN74ALVTH16827VR datasheet

 

Description

The SN74ALVTH16827VR, 74ALVTH16827 devices are 20-bit buffers/line drivers designed for 2.5-V or 3.3-V VCCoperation, but with the capability to provide a TTL interface to a 5-V system environment.

The devices are composed of two 10-bit sections with separate output-enable signals. For either 10-bit buffer section, the two output-enable (1OE1and 1OE2, or 2OE1and 2OE2) inputs must be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 10-bit buffer section are in the high-impedance state.

When VCC is between 0 and 1.2 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.2 V, OEshould be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level.

Features

1. State-of-the-Art Advanced BiCMOS Technology (ABT) WidebusE Design for 2.5-V and 3.3-V Operation and Low Static Power Dissipation

2. Support Mixed-Mode Signal Operation (5-V Input and Output Voltages With 2.3-V to 3.6-V VCC)

 

SN74ALVTH16827VR Datasheet PDF Download


SN74ALVTH16827VR pdf

Other data sheets are available within the file:

74ALVTH16827DLG4, 74ALVTH16827DLRG4, 74ALVTH16827GRE4,

74ALVTH16827GRG4, 74ALVTH16827VRE4