74ALVCH162244DGG Datasheet – 16-bit, Buffer / Line Driver

Part Number: 74ALVCH162244DGG

Function: 16-bit buffer/line driver with 30Ohm termination resistor (3-State)

Package: SSOP, TSSOP 48 Pin type

Manufacturer: Philips Electronics ( https://www.nxp.com/ )

Pinouts:

74ALVCH162244DGG datasheet

 

Description

The 74ALVCH162244 is a high-performance, low-power, low-voltage, Si-gate CMOS device, superior to most advanced CMOS compatible TTL families.

The IC is a 16-bit non-inverting buffer/line driver with 3-State outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The 3-State outputs are controlled by the output enable inputs 1OEand 2OE. A HIGH on nOEcauses the outputs to assume a high impedance OFF-state. The 74ALVCH162244 is designed with 30Ω series resistors in both HIGH and LOW output states.

The deivces has active bus hold circuitry which is provided to hold unused or floating data inputs at a valid logic level. This feature eliminates the need for external pull-up or pull-down resistors.

 

Features

1. Wide supply voltage range of 1.2V to 3.6V

2. Complies with JEDEC standard no. 8-1A

3. CMOS low power consumption

4. MULTIBYTETM flow-through standard pin-out architecture

5. Low inductance multiple VCC and ground pins for minimum noise and ground bounce

6. Direct interface with TTL levels

7. Bus hold on all data inputs

Other data sheets are available within the file:

74ALVCH162244, 74ALVCH162244DL, ACH162244DGG, ACH162244DL, 74162244

 

74ALVCH162244DGG Datasheet PDF Download


74ALVCH162244DGG pdf

74VHCT245 Datasheet PDF – Octal Buffer / Line Driver

Part Number: 74VHCT245

Function: Octal Buffer/Line Driver with 3-STATE Outputs

Package: SOP, SOIC, TSSOP, DIP 20 Pin Type

Manufacturer: Fairchild Semiconductor

Pinouts:

74VHCT245 datasheet

 

Description

The 74VHCT245A is an advanced high speed CMOS octal bus transceiver fabricated with silicon gate CMOS technology. It achieves high speed operation similar to equivalent Bipolar Schottky TTL while maintaining the CMOS low power dissipation. The VHCT245A is intended for bidirectional asynchronous communication between data busses. The direction of data transmission is determined by the level of the T/R input. The enable input can be used to  disable the device so that the busses are effectively isolated.

Features

1. High Speed: tPD = 5.4 ns (typ) at VCC = 5V

2. Power Down Protection on Inputs and Outputs

3. Low Power Dissipation: ICC = 4 µA (Max) @ TA = 25°C

4. Pin and Function Compatible with 74HCT245

 

Other data sheets are available within the file:

74VHCT245AM, 74VHCT245AMTC, 74VHCT245AMTCX, 74VHCT245AMX

 

74VHCT245 Datasheet PDF Download


74VHCT245 pdf