SSC9502 is one of the semiconductor types.

This product has Controller IC functions.

The package is DIP 16 pin type.

The manufacturers of this product is Sanken.

See the preview image and the PDF file for more information.

Images:

Description

The SSC9502 is a controller IC, incorporating a floating drive circuit for half-bridge type resonance. The product achieves high efficiency and low noise power supply systems by the ZVS and ZCS. The product is recommended for high-efficiency small and standardized power supplies because of easy circuit designs with few external components.

Controller IC for Current Resonant Type Switching Power Supply with Half-Bridge Resonance, High Efficiency and Low Noise.

Features

1. Soft-Switched Multi-Resonant Zero Current Switch (SMZ)

The zero-current switching (ZSC) and zero-voltage switching (ZVS) of half-bridge type resonance achieve the high efficiency and low noise systems.

2.  Automatic Dead Time Adjustment Function for Wide Resonant Conditions

3. Burst-Oscillation Function:

The function enables the stable output control at no load to light load conditions and improves the efficiency.

 

Applications:

1. Switching Power Supplies for

2. Digital Consumer Equipment; LCD-TVs, PDP-TVs, etc.,

3. OA Equipment; Severs, Multi-Function Printers, etc.,

4. Industry Machines, Communication Devices, Others

 

SSC9502 PDF Datasheet

This post describes for the LED drive IC. A Constant Current LED Driver IC is a specialized integrated circuit designed to provide a stable and regulated current to light-emitting diodes (LEDs). LEDs require a constant current to operate reliably and efficiently, as their brightness is directly proportional to the current flowing through them. Constant current LED driver ICs ensure that the LEDs receive a consistent and accurate current regardless of variations in supply voltage or LED characteristics.

Part Number: WS2811.

Package: DIP 8 Pin, SOP 8 Pin.

Function: 256 Gray level 3 channal Constant current LED drive IC.

Manufacturer: WorldSemi ( http://www.world-semi.com ).

Image

Description

The WS2811 is 3 output channels special for LED driver circuit. It internal include intelligent digital port data latch and signal reshaping amplification drive circuit.Also include a precision internal oscillator and a 12V voltage programmable constant current output drive. In the purpose of reduce power supply ripple, the 3 output channels designed to delay turn-on function.

IC use single NZR communication mode.After the chip power-on reset, the DIN port receivedata from controller, the first IC collect initial 24bit data then sent to the internal data latch, theother data which reshaping by the internal signal reshaping amplification circuit sent to the next cascade IC through the DO port. After transmission for each chip,the signal to reduce 24bit. IC adopt auto reshaping transmit technology, making the chip cascade number is not limited the signal transmission, only depend on the speed of signal transmission.

 

Pinouts:

Features :

1. Output port compression 12V.

2. Built in stabilivolt, Only add a resistance to IC VDD feet when under 24V power supply.

3. Gray level 256 can be adjusted and scan frequency not less than 400Hz/s.

4. Built in signal reshaping circuit,after wave reshaping to the next driver, ensure wave-form distortion not accumulate.

[…]

Applications:

1. LED decorative lighting.

2. Indoor / outdoor LED video or irregular screen

Reference Site:

1. How to control WS2811 RGB LED with Arduino – Hackster.io

WS2811 Dataheet PDF