RTD2270L PDF Datasheet – Flat Panel Display Controller

Part Number: RTD2270L, RTD2280L

Function: Flat Panel Display Controller

Package: LQFP 64 7×7 Type

Manufacturer: Realtek

Images:RTD2270L pdf controller

Description

RTD2270L is Flat Panel Display Controller. A flat panel display controller, also known as an FPD controller, is an integrated circuit or semiconductor device designed to manage and control the operation of flat panel displays (FPDs). FPDs are electronic visual displays that are commonly used in devices such as LCD (Liquid Crystal Display), OLED (Organic Light-Emitting Diode), and TFT (Thin-Film Transistor) screens found in smartphones, computer monitors.

 

Features

1. Embedded DDC with DDC1/2B/CI

2. Embedded one MCU with SPI flash controller.

3. Require only one crystal to generate all timing.

4. Programmable internal low-voltage-reset (LVR)

5. High resolution 6 channels PWM output, and wide range selectable PWM frequency.

6. Support input format up to FHD

7. Embedded BJT control circuit for 1.2V regulator replacement

Analog RGB Input Interface:

1. One Analog input supported

2. Integrated 8-bit triple-channel 210MHz ADC/PLL(option)

3. Embedded programmable Schmitt trigger of HSYNC

4. Support Sync-On-Green (SOG) and various kinds of composite sync modes

5. On-chip high-performance hybrid PLLs

6. High resolution true 64 phase ADC PLL

RTD2270L pinout datasheet

 

RTD2270L PDF Datasheet

Related articles across the web

SDC2921 PDF Datasheet – Voltage Mode PWM Controller

A Voltage-Mode PWM (Pulse-Width Modulation) Controller is an electronic device or integrated circuit (IC) used in power electronics and motor control applications to regulate the output voltage of a power converter, such as a DC-DC converter or a DC-AC inverter. This type of PWM controller operates by comparing a reference voltage with a feedback voltage from the output and adjusting the duty cycle of the PWM signal to maintain the desired output voltage.

Part Number: SDC2921

Function: Voltage Mode PWM Controller

Package: DIP 16 Pin Type

Manufacturer: SDC

Images:SDC2921 pdf

Description

The SDC2921 is a Pulse–Width Modulation (PWM) control circuit with complete protection circuits for the SMPS (Switching Mode Power Supply). It contains various functions, can minimize external components of switching power supply systems in personal computer. […]

Applications:

1. Complete PWM control and protection circuits

2. Over voltage protection for 3.3V/ 5V/ 12V/ PT

3. Under voltage protection for 3.3V/ 5V/ 12V

4. 280ms PG time delay

5. Open drain power good output

6. 280ms time delay for UVP

7. Remote ON/OFF function

8. Built-in soft-start function

SDC2921 pinout datasheet

Pin Discriptions :

1 V33 OVP/UVP input for 3.3V

2 V5 OVP/UVP input for 5V

3 V12 OVP/UVP input for 12V

4 PT Extra OVP protection input

5 GND Ground

6 RT Oscillation frequency set by external resistor

7 C1 PWM open drain output 1

8 C2 PWM open drain output 2

9 REM Remote on/off input

10 SS Soft start function set by external capacitor

11 PG Power good signal

12 DET Extra protection input

13 VCC Supply voltage

14 OPOUT OP output

15 VIN- OP negative input

16 VIN+ OP positive input

SDC2921 PDF Datasheet