Part Number: TPS65000

Function: 2.25 MHz Step Down Converter with Dual LDOs and SVS

Package: 3mm x 3mm 16-Pin QFN Type

Manufacturer: Texas Instruments

Pinouts:

 

Description

The TPS65000 and TPS65001 are single chip Power Management ICs for portable applications. Both devices combine a single step-down converter with two low dropout regulators. The step-down converter enters a low power mode at light load for maximum efficiency across the widest possible range of load currents. For low noise applications, the devices can be forced into fixed frequency PWM via a pin. The step-down converter allows the use of a small inductor and capacitors to achieve a small solution size. The step-down converter has Power Good status output that can be used for sequencing. The LDOs are capable of supplying 300mA, and can operate with an input voltage range between 1.6V and 6V, allowing them to be supplied from the step-down converter or directly from the main battery. The step-down converter and the LDOs have separate voltage inputs and enables, allowing for design
and sequencing flexibility.

Features

1. Step-Down Converters: – VIN Range From 2.3V to 6V

(1) Spread Spectrum Clock (SSC) Generation for Reduced EMI
(2) 2.25MHz Fixed Frequency Operation
(3) 600mA or 1A (TPS650061) Output Current

2. LDOs:– VIN Range From 1.6V to 6V

(1) Adjustable Output Voltage
(2) Up to 300mA Output Current
(3) Separate Power Inputs and Enables

3. Supply Voltage Supervisor (TPS65001)

(1) Manual Reset Input for Push Button
(2) Adjustable Reset Time
(3) Adjustable Reset Voltage

4. 3mm × 3mm 16-Pin QFN (TPS65000)

5. 3mm × 3mm 20-Pin QFN (TPS65001)

Applications:

1. Point of Load
2. Embedded Processor Power
3. Cell Phones, Smart-Phones
4. PDAs, Pocket PCs
5. Portable Media Players

Other data sheets are available within the file:

TPS650001, TPS650001RTE, TPS650001RTER, TPS650001RTET,

TPS65000, TPS65001, TPS65003, TPS65006, TPS650061

 

TPS65000 Datasheet PDF Download

Part Number: LDC1000

Function: Inductance to Digital Converter

Package: WSON 16 Pin Type

Manufacturer: Texas Instruments

Imge and Pinouts:

 

Description

This is Inductance to Digital Converter.

Inductive Sensing is a contact-less, short-range sensing technology that enables low-cost, high-resolution sensing of conductive targets in the presence of dust, dirt, oil, and moisture, making it extremely reliable in hostile environments. Using a coil which can be created on a PCB as a sensing element, the LDC1000 enables ultra-low cost system solutions.

Inductive sensing technology enables precise measurement of linear/angular position, displacement, motion, compression, vibration, metal composition, and many other applications in markets including automotive, consumer, computer, industrial, medical, and communications. Inductive sensing offers better performance and reliability at lower cost than other, competitive solutions.

Features

1. Magnet-Free Operation

2. Sub-Micron Precision

3. Adjustable Sensing Range (Through Coil Design)

4. L Resolution: 24-Bit

5. LC Frequency Range: 5 kHz to 5 MHz

Applications:

1. Position Sensing

2. Motion Sensing

3. Gear-Tooth Counting

4. Multi-Function Printers

 

 

Other data sheets are available within the file:

LDC1000NHRJ, LDC1000NHRR, LDC1000NHRT

 

LDC1000 Datasheet PDF Download