PT6574LQ Datasheet PDF – LCD Driver IC, LQFP 80 Pin – PTC

Part Number: PT6574LQ, PT6574

Function: LCD Driver IC

Package: LQFP 80 Pin Type

Manufacturer: Princeton Technology ( http://www.princeton.com.tw )

Image

pt6574lq-lcd-driver

Description

The PT6574LQ is a 1/4 -duty general purpose LCD Driver IC utilizing CMOS Technology. It can drive up to 264 segments and control up to 8 general purpose output ports. The LCD drive block voltage range is from 2.7V to 6.0V and is independent of the logic block power supply voltage. Under a serial data interface, PT6574 can support 1/4 duty, 1/2 bias or 1/4 duty, 1/3 bias drive techniques. Display data is displayed directly without the need for a decoder circuit. Pin assignments and application circuit are optimized for easy PCB Layout and cost saving advantages.

An LCD driver IC typically consists of several key components, such as shift registers, segment drivers, and timing generators. The shift registers convert serial data into parallel data, which is then sent to the segment drivers. The segment drivers then apply the appropriate voltages to the LCD segments to create the desired display. The timing generators provide the necessary clock signals and timing signals to synchronize the operation of the LCD driver with the LCD itself.

Pinout

pt6574lq-datasheet-pinout

Features

1. CMOS Technology
2. RC Oscillator Circuit
3. Up to 264 Segments
4. Supports 1/4 Duty, 1/2 Bias Drive or 1/4 Duty 1/3 Bias Drive Techniques (Serial Data Control)
5. RC Oscillation Circuit

 

Applications

1. Cellular Phone
2. Data Bank/Organizer
3. Electronic Dictionary/Translator
4. P.O.S.
5. Information Appliance
6. Caller ID
7. Pager
8. Electronic equipment with LCD Display Panel

 

PT6574LQ Datasheet PDF


 

 

Related articles across the web

L9947 Datasheet PDF – Quad Half-Bridge High-Side Driver

Part Number: L9947

Function: Quad Half-Bridge High-Side Driver

Package: Multiwatt 15 Type

Manufacturer: STMicroelectronics

Image and Pinouts:

L9947 datasheet

 

Description

The L9947 is a bus controlled power interface intended for automotive applications realized in
multipower BCD60II technology. Up to three DC motors and one grounded resistive load can be
driven with its four half-bridge and one high-side driver power outputs. The microcomputer compatible bidirectional parallel bus allows several interfaces connected on the same bus (multiplex system). The full diagnostic information is available on the bus.

Features

1. LOW CONSUMPTION IN STANDBY MODE (<100µA AT ROM TEMP; < 150µA AT 130°C)

2. TWO HALF BRIDGES FOR 3A LOAD (Rdson= 0.25Ω TYP; Tj= 25°C)

3. TWO HALF BRIDGES FOR 0.5A LOAD(Rdson= 2.5Ω TYP; Tj= 25°C)

4. HIGH SIDE DRIVER FOR 2.5A LOAD(Rdson= 0.45Ω TYP; Tj= 25°C)

5. DIRECT CONTROLLED BY µC (MULTIPLEX SYSTEM)

6. OUTPUT HIGH/LOW LEVEL DIAGNOSTIC

7. OVERCURRENT SWITCH OFF AND DIAGNOSTIC

8. OVERTEMPERATURE DIAGNOSTIC BE FORE SWITCH OFF

9. OPEN LOAD DIAGNOSTIC

Other data sheets are available within the file: L-9947, L9947S

L9947 Datasheet PDF Download


L9947 pdf