LM319 Datasheet – Dual Comparator, DIP 14 – National

Part Number: LM319

Function: High Speed Dual Comparator

Package: SOIC, DIP 14 Pin

Manufacturer: National Semiconductor (Texas Instruments)

Image

LM319 Comparator

Description

The LM319 series are precision high speed dual comparators fabricated on a single monolithic chip. They are designed to operate over a wide range of supply voltages down to a single 5V logic supply and ground. Further, they have higher gain and lower input currents than devices like the LM710. The uncommitted collector of the output stage makes the LM119 compatible with RTL, DTL and TTL as well as capable of driving lamps and relays at currents up to 25 mA. The LM319A offers improved precision over the standard LM319, with tighter tolerances on offset voltage, offset current, and voltage gain.

Pinouts:

LM319 datasheet

Features

1. Two Independent Comparators
2. Operates from a Single 5-V Supply
3. Typically 80-ns Response Time at ±15 V
4. Minimum Fan-out of 2 Each Side
5. Maximum Input Current of 1 μA Over Temperature
6. Inputs and Outputs can be Isolated from System Ground
7. High Common-Mode Slew Rate

Acquired by Texas Instruments on September 23rd, 2011.

Other data sheets are available within the file: LM319AM, LM319M, LM319N

LM319 Datasheet PDF

LM319 pdf

NJU7018M Datasheet PDF – Dual C-MOS Operational Amplifier

Part Number: NJU7018M

Function: Low-voltage Operation Dual C-MOS Operational Amplifier

Package: DMP 8, DIP 8, SSOP 8, MSOP 8 Pin type

Manufacturer: Japan Radio Corporation

Pinouts:

NJU7018M datasheet

 

Description

The NJU7018M is a low voltage single-power-supply and low operating current dual C-MOS operational amplifier.

The input bias current is as low as less than 1pA consequently the very small signal around the ground level can be amplified.

The minimum operating voltage is 1V and the output stage permits output signals to swing between both of the supply rails.

Furthermore, the NJU7018 is packaged with a various small one herefore it can be especially applied to portable items.

 

Features

1. Single-Power-Supply

2. Wide Operating Voltage ( VDD=1~5.5V )

3. Wide Output Swing Range ( VOM=2.9V min. @ 3.0V )

4. Low Operating Current ( IDD=0.75mA typ./circuit )

5. Low Bias Current ( IIB=1pA typ. )

6. Internal Compensation Capacitor

7. C-MOS Technology

 

NJU7018M Datasheet PDF Download


NJU7018M pdf

Other data sheets are available within the file:

NJU7018, NJU7018D, NJU7018-M, NJU7018R, NJU7018V