MX25L3206E Datasheet – 32M Bit CMOS Serial Flash – MXIC

Part Number: MX25L3206E

Function: 32M-BIT [x 1 / x 2] CMOS SERIAL FLASH

Manufacturer: Macronix International

Image :

MX25L3206E datasheet

 

Description

The MX25L3206E feature a serial peripheral interface and software protocol allowing operation on a simple 3-wire bus. The three bus signals are a clock input (SCLK), a serial data input (SI), and a serial data output (SO). Serial access to the device is enabled by CS# input. When it is in Dual Output read mode, the SI and SO pins become SIO0 and SIO1 pins for data output.

 

Pinout

MX25L3206E pinout
Features

1. Single Power Supply Operation
– 2.7 to 3.6 volt for read, erase, and program operations

2. Serial Peripheral Interface compatible — Mode 0 and Mode 3

3. 33,554,432 x 1 bit structure or 16,777,216 x 2 bits (Dual Output mode) structure

4. 1024 Equal Sectors with 4K byte each
– Any Sector can be erased individually

5. 64 Equal Blocks with 64K byte each
– Any Block can be erased individually

6. Program Capability
– Byte base
– Page base (256 bytes)

7. Latch-up protected to 100mA from -1V to Vcc +1V

MX25L3206E Datasheet PDF Download

25L3206E pdf


 

Other data sheets are available within the file: MX25L3206EMI-12G, MX25L3206EPI-12G, MX25L3206EZNI-12G

Related articles across the web

M29F400 Datasheet PDF – 4 Mbit, Single Supply Flash Memory

Part Number: M29F400

Function: 4 Mbit ( 512Kb x8 or 256Kb x16 ) / Boot Block Single Supply Flash Memory

Package: TSOP 48, SO44 Pin Type

Manufacturer: STMicroelectronics

Images :

M29F400 datasheet

Description

The M29F400B is a 4 Mbit (512Kb x8 or 256Kb x16) non-volatile memory that can be read, erased and reprogrammed. These operations can be performed using a single 5V supply. On power-up the memory defaults to its Read mode where it can be read in the same way as a ROM or EPROM. The M29F400B is fully backward compatible with the M29F400.

Features

1. SINGLE 5V±10% SUPPLY VOLTAGE for PROGRAM, ERASE and READ OPERATIONS
2. ACCESS TIME : 45ns
3. PROGRAMMING TIME : 8μs per Byte/Word typical
4. UNLOCK BYPASS PROGRAM COMMAND : Faster Production/Batch Programming
5. TEMPORARY BLOCK UNPROTECTION MODE

Pinouts:

components

Other data sheets are available within the file: M29F400BB, M29F400BT

M29F400 Datasheet PDF Download


M29F400 pdf