EN29F040-90PI Datasheet – 4 Megabit Flash Memory – EON

Part Number: EN29F040-90PI

Function: 4 Megabit (512K x 8-bit) Flash Memory

Package: DIP, PLCC, TSOP 32 Pin Type

Manufacturer: Eon Silicon Solution

Image :

EN29F040-90PI datasheet

 

Description

The EN29F040 is a 4-Megabit, electrically erasable, read/write non-volatile flash memory. Organized into 512K words with 8 bits per word, the 4M of memory is arranged in eight uniform sectors of 64Kbytes each. Any byte can be programmed typically in 10µs. The EN29F040 features 5.0V voltage read and write operation, with access times as fast as 45ns to eliminate the need for WAIT states in high-performance microprocessor systems.

Features

1. Single Sector and Chip Erase
2. Sector Unprotect Mode
3. Embedded Erase and Program Algorithms
4. Erase Suspend / Resume modes : Read and program another Sector during Erase Suspend Mode
5. 0.35 μm double-metal double-poly triple-well CMOS Flash Technology
6. 5.0V operation for read / write / erase operations

 

Other data sheets are available within the file: EN29F040-90J, EN29F040-90PI, EN29F040-90T, EN29F040-90TI, EN29F045-90J

EN29F040-90PI Datasheet PDF Download


EN29F040-90PI pdf

 

27SF020 Datasheet – 2 Mbit (256K x 8), Flash Memory – SST

Part Number: 27SF020

Function: 2 Mbit (256K x 8) Many-Time Programmable Flash Memory

Package: 32 PDIP Type

Manufacturer: Silicon Storage Technology

Pinouts:

27SF020 datasheet

 

Description

The SST27SF256/512/010/020 are a 32K x8 / 64K x8 / 128K x8 / 256K x8 CMOS, Many-Time Programmable (MTP) low cost flash, manufactured with SST’s proprietary, high performance SuperFlash technology. The split-gate cell design and thick oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches. These MTP devices can be electrically erased and programmed at least 1000 times using an external programmer with a 12 volt power supply. They have to be erased prior to programming. These devices conform to JEDEC standard pinouts for byte-wide memories.

Features

1. 4.5-5.5V Read Operation
2. Superior Reliability
(1) Endurance: At least 1000 Cycles
(2) Greater than 100 years Data Retention
3. Low Power Consumption
(1) Active Current: 20 mA (typical)
(2) Standby Current: 10 μA (typical)
4. Fast Read Access Time
(1) 70 ns
(2) 90 ns
5. Fast Byte-Program Operation
(1) Byte-Program Time: 20 μs (typical)
(2) Chip Program Time:
0.7 seconds (typical) for SST27SF256
1.4 seconds (typical) for SST27SF512
2.8 seconds (typical) for SST27SF010
5.6 seconds (typical) for SST27SF020
6. Electrical Erase Using Programmer
(1) Does not require UV source
(2) Chip-Erase Time: 100 ms (typical)

 

Other data sheets are available within the file: SST27SF020, 27SF256, 27SF512, 27SF010

27SF020 Datasheet PDF Download


27SF020 pdf