AM29F800BB-55EE Datasheet PDF – 8 Mbit, Erase Flash Memory

Part Number: AM29F800BB-55EE

Function: 8 Megabit (1 M x 8-Bit/512 K x 16-Bit), Boot Sector Flash Memory

Pakcage : 48-pin TSOP, 44-pin SO

Manufacturer: Advanced Micro Devices

Pinouts:

AM29F800BB-55EE datasheet

 

Description

The Am29F800B is an 8 Mbit, 5.0 volt-only Flash memory organized as 1,048,576 bytes or 524,288 words. The device is offered in 44-pin SO and 48-pin TSOP packages. The word-wide data (x16) appears on DQ15–DQ0; the byte-wide (x8) data appears on DQ7–DQ0. This device is designed to be programmed insystem with the standard system 5.0 volt VCC supply. A 12.0 V VPP is not required for write or erase operations. The device can also be programmed in standard EPROM programmers.

Features

1. Single power supply operation
(1) 5.0 Volt-only operation for read, erase, and program operations
(2) Minimizes system level requirements
2. Manufactured on 0.32 µm process technology
(1) Compatible with 0.5 µm Am29F800 device
3. High performance
(1) Access times as fast as 55 ns
4. Low power consumption (typical values at 5 MHz)
(1) 1 µA standby mode current
(2) 20 mA read current (byte mode)
(3) 28 mA read current (word mode)
(4) 30 mA program/erase current
5. Flexible sector architecture
(1) One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and fifteen 64 Kbyte sectors (byte mode)
(2) One 8 Kword, two 4 Kword, one 16 Kword, and fifteen 32 Kword sectors (word mode)
(3) Supports full chip erase
(4) Sector Protection features:

Other data sheets are available within the file: AM29F800BB-55EF, AM29F800BB-55EI, AM29F800BB-55EK, AM29F800BB-55SE

AM29F800BB-55EE Datasheet PDF Download


AM29F800BB-55EE pdf

M28F101 Datasheet – 1Mb (128Kx8, Chip Erase) Flash Memory

Part Number: M28F101

Function: 1 Mb (128K x 8, Chip Erase) FLASH MEMORY

Package: DIP, PLCC, TSOP 32 Pin Type

Manufacturer: STMicroelectronics

Pinouts:

M28F101 datasheet

 

Description

The FLASH Memory is a non-volatile memory which may be erased electrically at the chip level and programmed byte-by-byte. It is or ganised as 128K bytes of 8 bits.It uses a command register architecture to select the operating modes and thus provides a simple microprocessor interface. The M28F101 FLASH Memory is suitable for applications where the memory has to be reprogrammed in the equipment. The access time of 70ns makes the device suitable for use in high speed microprocessor systems.

Ordering Information

M28F101 ordering information

Features

1. 5V±10% SUPPLY VOLTAGE
2 12V PROGRAMMING VOLTAGE
3. FAST ACCESS TIME : 70ns
4. BYTE PROGRAMING TIME : 10µs typical
5. ELECTRICAL CHIP ERASE in 1s RANGE
6. LOW POWER CONSUMPTION – Stand-by Current: 100µA max
7. 10,000 ERASE/PROGRAM CYCLES
8. INTEGRATED ERASE/PROGRAM-STOP TIMER
9. OTP COMPATIBLE PACKAGES and PINOUTS
10. ELECTRONIC SIGNATURE
(1) Manufacturer Code: 20h
(2) Device Code: 07h

Other data sheets are available within the file: M28F101-100K1, M28F101-100K1R, M28F101-100K1TR, M28F101-100K3

M28F101 Datasheet PDF Download


M28F101 pdf

Related articles across the web