TA9687GN Datasheet – LCDM Inverter Controller ( PDF )

Part Number: TA9687GN

Function: LCDM Inverter Controller

Package: 16 SOP Type

Manufacturer: O2Mirco

Image:

TA9687GN datasheet inverter controller

Description

The TA9687GN is a high performance, cost-effective CCFL (Cold Cathode Fluorescent Lamp) controller designed for driving large-size Liquid Crystal Display (LCD) applications requiring 2 to 6 CCFLs. The controller converts unregulated DC voltages into a nearly sinusoidal lamp voltage and current waveforms.

The TA9687 supports full-bridge power conversion topologies while maintaining high-efficiency operation. The controller provides a soft-start operation, current and voltage regulation, overvoltage and over-current protection, high drive capability.

The control logic provides a regulated ignition voltage and appropriate protection features for over-voltage or over-current conditions.

Pinout

TA9687GN pinout

1 I VSEN Voltage Sense Feedback
2 I/O SSTCMP Capacitor for Soft-Start and Loop Compensation
3 I/O CT Timing Resistor and Capacitor for Operation and Striking Frequency
4 I/O RT1 Timing Resistor for Striking Frequency
5 — GNDA Signal Ground
6 O PDR2 High Side Driver Output 2
7 — GNDP Power Ground
8 O NDR2 Low Side Driver Output 2
9 O NDR1 Low Side Driver Output 1
10 O PDR1 High Side Driver Output 1
11 — VDDA Input Power Pin
12 I/O TIMER Timing Capacitor for Delay Timer
13 I PWM External PWM Dimming Input
14 I ISEN Current Sense Feedback
15 I OVPT Over-Voltage Protection Threshold Voltage
16 I ENA IC Enable/Disable

 

Features

• Constant operating frequency
• Drives positive/negative-impedance lamps during ignition
• High drive current for external MOSFETs
• User-defined ignition time and shutdown delay time
• Built-in intelligence for ignition and normal operation of CCFLs
• Built-in open-lamp protection and overvoltage protection for backlight system
• Optimized soft-start function

TA9687GN Datasheet

Related articles across the web

EGP1000W Manual – Sine Wave Inverter Power Board – EG

Part Number: EGP1000W

Function : Pure Sine Wave Inverter Power Board

Package: Power Board

Manufacturer: EG Micro ( www.EGmicro.com )

Image

egp1000w-manual-inverter-power-board
Description

The EGP1000W inverter power board is a dedicated EG8010 SPWM chip and EGS001 sine wave inverter driver board dedicated power floor, for 3KVA following inverter unit. EGP1000W inverter power board has two modes: the former by the high-frequency transformer DC-DC boost after the input high-voltage direct current to the board power supply interface direct inverter output mode (high-frequency mode); direct input low-voltage direct current to the board On the power supply interface Inverter output Low-voltage AC voltage after the transformer step-up output high-voltage AC (frequency mode). Users can choose according to demand mode and power devices, and through the regulator potentiometer to adjust the AC output voltage.

 

EGP1000W Schematic

egp1000w-schematic

 

Features

EGP1000W inverter power board There are two modes: the former by the high-frequency transformer DC-DC boost after the input high-voltage direct current to the board power supply interface direct inverter output mode (high-frequency mode); direct input low-voltage direct current to the board On the power supply interface Inverter output Low-voltage AC voltage after the transformer step-up output high-voltage AC (frequency mode). Two modes of operation different power devices, users can choose according to system requirements. Work in the high-frequency mode, the DC voltage is high, the same power under the current small; frequency mode, the DC voltage is low, the same power under the current.

 

EGP1000W Manual ( Datasheet PDF )

Similar features and reference parts

EG8010

EGS002

Related articles across the web