JFET

TLO82 Datasheet – Dual JFET Input Operational Amplifier – TI

Posted on by pinout

Part Number: TLO82, Correct Part Number: TL082

Function : Wide Bandwidth Dual JFET Input Operational Amplifier

Package: SOIC 8 Pin, PDIP 8 Pin Type

Manufacturer: Texas Instruments

Image

TLO82 Datasheet TL082 opamp

Features

1. Internally Trimmed Offset Voltage: 15 mV
2. Low Input Bias Current: 50 pA
3. Low Input Noise Voltage: 16nV/√Hz
4. Low Input Noise Current: 0.01 pA/√Hz
5. Wide Gain Bandwidth: 4 MHz
6. High Slew Rate: 13 V/μs
7. Low Supply Current: 3.6 mA
8. Low Total Harmonic Distortion: ≤0.02%
9. Low 1/f Noise Corner: 50 Hz
10. Fast Settling Time to 0.01%: 2 μs

Pinout

TLO82 Datasheet TL082 Pinout

Description

These devices are low cost, high speed, dual JFET input operational amplifiers with an internally trimmed input offset voltage ( BI-FET II™ technology). They require low supply current yet maintain a large gain bandwidth product and fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The , TLO82TL082 is pin compatible with the standard LM1558 allowing designers to immediately upgrade the overall performance of existing LM1558 and most LM358 designs.

TLO82 Datasheet


 

Related articles across the web

2062C Datasheet PDF – JFET-input Operational Amplifier

Posted on by pinout

Marking : 2062C, Part Number: TLE2062CDR

Function: Dual JFET-Input High-Output-Drive µPower Operational Amplifier

Package: SOIC 8 Pin Type

Manufacturer: Texas Instruments

Pinouts:

2062C datasheet pinout

Description

The TLE206x series of low-power JFET-input operational amplifiers doubles the bandwidth of the earlier generation TL06x and TL03x BiFET families without significantly increasing power consumption. Texas Instruments Excalibur process also delivers a lower noise floor than the TL06x and TL03x. On-chip zener trimming of offset voltage yields precision grades for dc-coupled applications.

BiFET operational amplifiers offer the inherently-higher input impedance of the JFET-input transistors, without sacrificing the output drive associated with bipolar amplifiers. This makes them better suited for interfacing with high-impedance sensors or low-level ac signals. They also feature inherently better ac response than bipolar or CMOS devices having comparable power consumption.

Features

1. 2×Bandwidth (2 MHz) of the TL06x and TL03x Operational Amplifiers
2. Low Supply Current … 290 µA/Ch Typ
3. On-chip Offset Voltage Trimming for Improved DC Performance
4. High Output Drive, Specified into 100-Ω Loads
5. Lower Noise Floor Than Earlier Generations of Low-Power BiFETs

Other data sheets are available within the file: TLE2062CD, TLE2062CDRG4

2062C Datasheet PDF Download


2062C pdf

Related articles across the web