Part Number: KMK2U000VM-B604
Function: 32GB eMMC + 8Gb DDP LPDDR2-S4 SDRAM
Pacakge : 186-ball FBGA Type – 12 x 16 x 1.4mmt, 0.5mm pitch
Manufacturer: Samsung
Images:
Description
The KMK2U000VM is a Multi Chip Package Memory which combines 32GB e·MMC and 8G bit DDP LPDDR2 S4 SDRAM. The SAMSUNG e·MMC is an embedded MMC solution designed in a BGA package form. e·MMC operation is identical to a MMC card and therefore is a simple read and write to memory using MMC protocol v4.41 which is a industry standard. e·MMC consists of NAND flash and a MMC controller. 3V supply voltage is required for the NAND area (VDDF) whereas 1.8V or 3V dual supply voltage (VDD) is supported for the MMC controller.
Maximum MMC interface frequency of 52MHz and maximum bus widths of 8 bit are supported. There are several advantages of using e·MMC. It is easy to use as the MMC interface allows easy integration with any microprocessor with MMC host. Any revision or amendment of NAND is invisible to the host as the embedded MMC controller insulates NAND technology from the host. This leads to faster product development as well as faster times to market.
The embedded flash mangement software or FTL(Flash Transition Layer) of e·MMC manages Wear Leveling, Bad Block Management and ECC. The FTL supports all features of the Samsung NAND flash and achieves optimal performance.
LPDDR2-S4 uses a double data rate architecture on the Command/Address (CA) bus to reduce the number of input pins in the system. The 10-bit CA bus
contains command, address, and Bank information. Each command uses one clock cycle, during which command information is transferred on both the
positive and negative edge of the clock. […]
Ordering Information
<e·MMC>
1. MultiMediaCard System Specification Ver. 4.41 compatible. Detail description is referenced by JEDEC Standard
2. SAMSUNG e·MMC supports below special features which are being discussed in JEDEC
– High Priority Interrupt scheme is supported
– Back ground operation is supported.
3. Full backward compatibility with previous MultiMediaCard system ( 1bit data bus, multi-e·MMC systems)
eMMC is a type of non-volatile flash memory that is commonly used in mobile phones, digital cameras, and other small electronic devices. eMMC offers high speed, low power consumption, and a small form factor, making it an ideal choice for small devices that require high performance and reliability.
SDRAM, on the other hand, is a type of volatile memory that is commonly used in computers and other larger electronic devices. It is a synchronous dynamic random access memory, which means that it synchronizes its operations with the system clock, allowing for faster access to memory.
KMK2U000VM-B604 Datasheet
