S29AL016D Datasheet PDF – 16 Megabit, Flash Memory

Part Number: S29AL016D

Function: 16 Megabit, CMOS 3.0 Volt-only Boot Sector Flash Memory

Package: FBGA 48, TSOP 48, SOP 44 Pin Type

Manufacturer: Spansion Inc.

Pinouts:

S29AL016D datasheet

 

Description

The S29AL016D is a 16 Mbit, 3.0 Volt-only Flash memory organized as 2,097,152 bytes or 1,048,576 words.

The device is offered in 48-ball FBGA, and 48-pinTSOP packages. The word-wide data (x16) appears on DQ15–DQ0; the byte-wide (x8) data appears on DQ7–DQ0. This device is designed to be programmed in system with the standard system 3.0 volt VCCsupply. A 12.0 V VPPor 5.0 VCCare not required for write or erase operations. The device can also be programmed in standard EPROM programmers.

Features

1. Architectural Advantages

(1) Single Power Supply Operation

– Full voltage range: 2.7 to 3.6 volt read and write operations for battery-powered applications

(2) Manufactured on 200 nm Process Technology

– Fully compatible with 200 nm Am29LV160D and MBM29LV160E devices

 

S29AL016D Datasheet PDF Download


S29AL016D pdf

Other data sheets are available within the file:

S29AL016, S29AL016D70TAI010, S29AL016D70TAI011,

S29AL016D70TFI012, S29AL016D70TFI013

KLM8G2FEJA Datasheet PDF – 8GB, eMMC – Samsung

Part Number: KLM8G2FEJA

Function: eMMC – 8GB, Memory ( NAND Flash Memory )

Package: 169FBGA Type

Manufacturer: Samsung

Image:

KLM8G2FEJA datasheet

 

Description

The SAMSUNG moviNAND is an embedded MMC solution designed in a BGA package form. moviNAND operation is identical to a MMC card and therefore is a simple read and write to memory using MMC protocol v4.41 which is a industry standard.

moviNAND consists of NAND flash and a MMC controller. 3V supply voltage is required for the NAND area (VDDF) whereas 1.8V or 3V dual supply voltage (VDD) is supported for the MMC controller. Maximum MMC interface frequency of 52MHz and maximum bus widths of 8 bit are supported.

Features

1. MultiMediaCard System Specification Ver. 4.41 compatible. Detail description is referenced by JEDEC Standard

2. SAMSUNG moviNAND supports below special features which are being discussed in JEDEC

(1) High Priority Interrupt scheme is supported

(2) Back ground operation is supported.

(3) Package Type :14×18, Vol (V) : 1.8/3.3

 

KLM8G2FEJA Datasheet PDF Download


KLM8G2FEJA pdf

Other data sheets are available within the file: KLMAG4FEJA, KLMBG8FEJA, KLMCGAFEJA