Part Number: 17PM-K342B

Function: Stepper Motor

Weight : 250 g

Manufacturer: NMB-MAT (Minebea-Matsushita Motor)

Images:

Description

17PM-K342B is an electromechanical device that converts electrical pulses into discrete mechanical movements, or steps. Each step corresponds to a fixed angle of rotation, and the motor moves incrementally in response to the pulses it receives. Stepper motors are widely used in various applications where precise control of rotation and position is required.

Minebea-Matsushita Motor Corporation

17PM-K049U 17PM-K064U 17PM-K142U 17PM-K149U 17PM-K249U 17PM-K264U 17PM-K342U 17PM-K349U 17PM-K442U 17PM-K449U 17PM-K749U 17PM-K764U 17PM-K049B 17PM-K142B 17PM-K249B 17PM-K342B 17PM-K442B 17PM-K749B Step Angle deg  Drive Sequence Rated Current A UNI-POLAR 1 UNI-POLAR 0.6 UNI-POLAR 1.4 UNI-POLAR 1 UNI-POLAR 0.8 UNI-POLAR 0.6 UNI-POLAR 1.4 UNI-POLAR 1 UNI-POLAR 1.4 UNI-POLAR 1 UNI-POLAR 0.9 UNI-POLAR 0.6 BI-POLAR 0.7 BI-POLAR 1 BI-POLAR 0.6 BI-POLAR 0.9 BI-POLAR 0.9 BI-POLAR 0.6 Resistance Ohms 0 Copyright Minebea Co., Ltd. TORQUE (mNm) Torque/Speed Characteristics Model No: 17PM-K049U,K064U,K049B Driver: Chopper Dual Supply Voltage: 24.0 (Volt)  0 100 1,000 10,000 FREQUENCY (Hz) K049U-1.0A K064U-0.6A K049B-0.7A 100,000 TORQUE (mNm) Model No: 17PM-K142U,K149U,K142B Driver: Chopper Dual Supply Voltage: 24.0 (Volt) 0 FREQUENCY (Hz) K142U-1.4A K149U-1.0A K142B-1.0A 100,000 Model No: 17PM-K249U,K264U,K249B Driver: Chopper Dual Supply Voltage: 24.0 (Volt)  10,000 FREQUENCY (Hz) K249U-0.8A K264U-0.55A K249B-0.6A 100,000 TORQUE (mNm) Model No: 17PM-K342U,K349U,K342B Driver: Chopper Dual Supply Voltage: 24.0 (Volt)FREQUENCY (Hz) K342U-1.4A K349U-1.0A K342B-0.9A 100,000 Model No: 17PM-K442U,K449U,K442B Driver: Chopper Dual Supply Voltage: 24.0 (Volt) 600 500 400 300 200 100 0 100 1,000 10,000 FREQUENCY (Hz) K442U-1.4A K449U-1.0A K442B-0.9A 100,000 TORQUE (mNm) Model No: 17PM-K749U,K764U,K749B Driver: Chopper Dual Supply Voltage: 24.0 (Volt) 100 90 […]

Applications:

1. 3D printers, CNC machines,

2. Linear motion systems, camera platforms

17PM-K342B PDF Datasheet

A continuous rotation servo motor, also known as a “360-degree servo,” is a type of servo motor that has been modified to rotate continuously in either direction without any physical stop. Unlike standard servo motors that have a limited range of motion (usually around 180 degrees), a continuous rotation servo can rotate continuously in a full 360-degree circle.

Part Number: SM-S4303R

Function: Continuous Rotation Servo Motor

Manufacturer: Pololu

Images:

Description

The SM-S4303R is a standard-sized servo that has been built by SpringRC specifically for continuous rotation. At 6 V, it has a maximum rotation speed of 54 RPM (no-load) and can produce up to 71 oz-in (5.1 kg-cm) of torque. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer. The servo can be controlled using a direct connection to a single microcontroller I/O line without any additional electronics, which makes it a great actuator for beginner robotics projects.

The SM-S4303R continuous rotation servo converts standard RC servo position pulses into continuous rotation speed. The default rest point is 1.5 ms, but this can be adjusted by using a small slotted screwdriver to turn the middle-point positioner. Pulse widths above the rest point result in counterclockwise rotation, with speed increasing as the pulse width increases; pulse widths below the rest point result in clockwise rotation, with speed increasing as the pulse width decreases.  […]

SM-S4303R PDF Datasheet