OP Amp

TL081 Datasheet – JFET-Input Operational Amplifier – TI

Posted on by pinout

Part Number: TL081

Function: Wide Bandwidth JFET Input Operational Amplifier

Manufacturer: Texas Instruments, National

Image :

tl081-jfet-op-amp

 

 

Description

The TL081 is a low cost high speed JFET input operational amplifier with an internally trimmed input offset voltage (BI-FET IITM technology). The device requires a low supply current and yet maintains a large gain bandwidth product and a fast slew rate. In addition, well matched high voltage JFET input devices provide very low input bias and offset currents. The TL081 is pin compatible with the standard LM741 and uses the same offset voltage adjustment circuitry. This feature allows designers to immediately upgrade the overall performance of existing LM741 designs.

 

Pinout

tl081-datasheet-pinout

Features

1.Low Power Consumption: 1.4 mA/ch Typ
2. Wide Common-Mode and Differential Voltage Ranges
3. Low Input Bias Current: 30 pA Typ
4. Low Input Offset Current: 5 pA Typ
5. Output Short-Circuit Protection
6. Low Total Harmonic Distortion: 0.003% Typ
7. High Input Impedance: JFET Input Stage
8. Latch-Up-Free Operation
9. High Slew Rate: 13 V/μs Typ
10. Common-Mode Input Voltage Range Includes Vcc+

Symbol

tl081-schematic-symbol

 

Official Homepage: https://www.ti.com/product/TL081

TL081 Datasheet


 

Other data sheets are available within the file: TL081CP, TL081ACD

Related articles across the web

LM10 Datasheet – OP Amp and Voltage Reference – National

Posted on by pinout

Part Number: LM10, LM10CN, LM10CWM

Function : Operational Amplifier and Voltage Reference

Package: H ( Metal Can 8 ), WM ( Small Outline 14 ), N ( Dual In Line 8 ) Package

Manufacturer: National Semiconductor, TI

Image

lm10-op-amp-voltage-reference

Description

The LM10 series are monolithic linear ICs consisting of a precision reference, an adjustable reference buffer and an independent, high quality op amp. The unit can operate from a total supply voltage as low as 1.1V or as high as 40V, drawing only 270μA. A complementary output stage swings within 15 mV of the supply terminals or will deliver ±20 mA output current with ±0.4V saturation. Reference output can be as low as 200 mV.

 

Pinout

lm10-datasheet-pinout

 

 

Features

1. Input offset voltage: 2.0 mV (max)

2. Input offset current: 0.7 nA (max)

3. Input bias current: 20 nA (max)

4. Reference regulation: 0.1% (max)

5. Offset voltage drift: 2μV/°C

6. Reference drift: 0.002%/°C

 

Reference Site

1. https://www.ti.com/lit/ds/symlink/lm10.pdf

2. Official Homepage: https://www.ti.com/product/LM10

 

LM10 Datasheet