OP Amp archives - Page 8 of 47

Description

The LM324 series are low–cost, quad operational amplifiers with true differential inputs. They have several distinct advantages over standard operational amplifier types in single supply applications. The quad amplifier can operate at supply voltages as low as 3.0 V or as high as 32 V with quiescent currents about one–fifth of those associated with the MC1741 (on a per amplifier basis). The common mode input range includes the negative supply, thereby eliminating the necessity for external biasing components in many applications. The output voltage range also includes the negative power supply voltage.

Featurers

• Short Circuited Protected Outputs
• True Differential Input Stage
• Single Supply Operation: 3.0 V to 32 V
• Low Input Bias Currents: 100 nA Maximum (LM324A)
• Four Amplifiers Per Package
• Internally Compensated
• Common Mode Range Extends to Negative Supply
• Industry Standard Pinouts
• ESD Clamps on the Inputs Increase Ruggedness without AffectingDevice Operation

Part Number: TL074, TL074CN

Function : LOW-NOISE JFET-INPUT OPERATIONAL AMPLIFIERS

Package: PDIP, SOIC 14 Pin Type

Manufacturer: Texas Instruments

Image

Description

The TL07xx, TL074 JFET-input operational amplifier family is designed to offer a wider previously developed operational amplifier family. Each of these JFET-input operational amplifiers incorporates well-matched, high-voltage JFET and bipolar transistors in a monolithic integrated circuit. The devices feature high slew rates, low-input bias and offset currents, and low offset-voltage temperature coefficient. The low harmonic distortion and low noise make the TL07xseries ideally suited for high-fidelity and audio pre-amplifier applications. Offset adjustment and external compensation options are available within the TL07x family.

Pinout

Features

1. Low Power Consumption
2. Wide Common-Mode and Differential Voltage Ranges
3. Low Input Bias and Offset Currents
4. Output Short-Circuit Protection
5. Low Total Harmonic Distortion: 0.003% Typical
6. Low Noise Vn = 18 nV/√Hz Typ at f = 1 kHz
7. High-Input Impedance: JFET Input Stage
8. Internal Frequency Compensation
9. Latch-Up-Free Operation
10. High Slew Rate: 13 V/μs Typical
11. Common-Mode Input Voltage Range ncludes VCC+

Logic Symbols

Official Homepage: https://www.ti.com/product/TL074

OP Amp

LM324AN Datasheet – Quad Operational Amplifiers – Motorola

Description

Pinout

Description

Featurers

LM324AN Datasheet

TL074 Datasheet – JFET-Input Operational Amplifier – TI

TL074 Datasheet

Related articles across the web