Optocoupler archives - Page 14 of 43

Part Number: 6N137

Function: High Speed 10MBit/s Logic Gate Optocoupler

Package: DIP, SOP 8 Pin Type

Manufacturer: Fairchild Semiconductor, Avago Technologies

Imag and Pinouts:

6N137 datasheet

Description

The 6N137, HCPL2601, HCPL2611 single-channel and HCPL2630, HCPL2631 dual-channel optocouplers consist of a 850 nm AlGaAS LED, optically coupled to a very high speed integrated photo-detector logic gate with a strobable output. This output features an open collector, thereby permitting wired OR outputs. The coupled parameters are guaranteed over the temperature range of -40°C to +85°C. A maximum input signal of 5mA will provide a minimum output sink current of 13mA (fan out of 8).

An internal noise shield provides superior common mode rejection of typically 10kV/µs. The HCPL2601 and HCPL2631 has a minimum CMR of 5kV/µs. The HCPL2611 has a minimum CMR of 10kV/µs.

Features

1. Veryhigh speed – 10 MBit/s

2. Superior CMR – 10 kV/µs

3. Double working voltage-480V

4. Fan-out of 8 over -40°C to +85°C

5. Logic gate output

6. Strobable output

7. Wired OR-open collector

Applications

1. Ground loop elimination

2. LSTTL to TTL, LSTTL or 5-volt CMOS

3. Line receiver, data transmission

4. Data multiplexing

5. Switching power supplies

6. Pulse transformer replacement

7. Computer-peripheral interface

6N137 Datasheet PDF Download

Other data sheets are available within the file:

6N-137, 6N137S, 6N137SD, 6N137SDV, 6N137SV

Description

The 6N137, HCPL-26XX/06XX/4661, HCNW137/26X1 are optically coupled gates that combine a GaAsP light emitting diode and an integrated high gain photo detector. An enable input allows the detector to be strobed. The output of the detector IC is an open collector Schottky clamped transistor. The internal shield provides a guaranteed common mode transient immunity specification of 5,000V/µs for the HCPL-X601/X631 and HCNW2601, and 10,000 V/µs for the HCPL-X611/X661 and HCNW2611.

This unique design provides maximum ac and dc circuit isolation while achieving TTL compatibility. The optocoupler ac and dc operational parameters are guaranteed from -40°C to +85°C allowing troublefree system performance. The 6N137, HCPL-26XX, HCPL-06XX, HCPL-4661, HCNW137,and HCNW26X1 are suitable for high speed logic interfacing,input/output buffering, as line receivers in environments that conventional line receivers cannot tolerate and are recom mended for use in extremely high ground or induced noise environments.

Features

1. High Speed: 10 MBd Typical
2. LSTTL/TTL Compatible
3. Low Input Current Capability: 5 mA
4. Guaranteed ac and dc Performance over Temperature: -40°C to +85°C
5. Available in 8-Pin DIP,SOIC-8, Widebody Packages
6. Strobable Output (Single Channel Products Only)
7. MIL-STD-1772 Version Available (HCPL-56XX/66XX)

Applications

1. Isolated Line Receiver
2. Computer-Peripheral Interfaces
3. Microprocessor System Interfaces
4. Digital Isolation for A/D, D/A Conversion
5. Switching Power Supply
6. Instrument Input/Output Isolation
7. Ground Loop Elimination

Other data sheets are available within the file: HCNW137, HCNW2601, HCNW2611, HCPL-0600

HCPL-0631, HCPL-0601, HCPL-0611, HCPL-0630, HCPL-0661, HCPL-2601
HCPL-2611, HCPL-2630, HCPL-2631, HCPL-4661

Optocoupler

6N137 Datasheet PDF / Fairchild, Optocoupler

Description

6N137 Datasheet PDF Download

6N137 Datasheet PDF – Optocoupler, DIP 8 – HP

Description

6N137 Datasheet PDF Download