PWM

UCC2813PW-0 Datasheet PDF – PWM Controller

Posted on by pinout

Part Number: UCC2813PW-0

Marking : 28130

Function: LOW POWER ECONOMY BICMOS CURRENT MODE PWM

Package: TSSOP 8 Pin Type

Manufacturer: Texas Instruments

Pinouts:

UCC2813PW-0 datasheet

 

Description

The UCC2813PW-0, UCC3813-x device family of high-speed, lowpower integrated circuits contains all of the control and drive components required for off-line and DC-to-DC fixed-frequency current-mode switching power supplies with minimal parts count.

Features

1. 100-µA Typical Starting Supply Current

2. 500-µA Typical Operating Supply Current

3. Operation to 1 MHz

4. Internal Soft Start

5. Internal Fault Soft Start

6. Internal Leading-Edge Blanking of the Current Sense Signal

7. 1-A Totem-Pole Output

8. 70-ns Typical Response from Current-Sense to Gate-Drive Output

9. 1.5% Tolerance Voltage Reference

10. Same Pinout as UCC3802, UC3842, and UC3842A

 

UCC2813PW-0 Datasheet PDF Download


UCC2813PW-0 pdf

Other data sheets are available within the file:
UCC2813D-0,UCC2813D-0G4,UCC2813D-1,UCC2813D-1G4,UCC2813D-2

AP1501A Datasheet – 150KHz, 5A, PWM Buck DC/DC Converter

Posted on by pinout

Part Number: AP1501A

Function: 150KHz, 5A PWM BUCK DC/DC CONVERTER

Package: TO263-5L, TO220-5L Type

Manufacturer: Diodes Incorporated.

Image and Pinouts:

AP1501A datasheet

 

Description

The AP1501A series are monolithic ICs that are designed for a step-down DC/DC converter, and possess the ability to drive a 5A load without additional transistor component. Due to reducing the number of external component, the board space can be saved easily. The external shutdown function can be controlled by logic level and then come into standby mode. The internal compensation makes feedback control have good line and load regulation without external design. Regarding protected function, thermal shutdown is to prevent over temperature operating from damage, and current limit is against over current operating of the output switch.

The AP1501A series operates at a switching frequency of 150Khz thus allowing smaller sized filter components than what would be needed with lower frequency switching regulators. Other features include a guaranteed +4% tolerance on output voltage under specified input voltage and output load conditions, and +15% on the oscillator frequency.

Features

1. Output voltage: 3.3V, 5V, 12V and adjustable output version
2. Adjustable version output voltage range, 1.23V to 37V+4%
3. 150Khz +15% fixed switching frequency
4. Voltage mode non-synchronous PWM control
5. Thermal-shutdown and current-limit protection
6. ON/OFF shutdown control input
7. Operating voltage can be up to 40V
8. Output load current: 5A
9. Low power standby mode
10. Built-in switching transistor on chip
11. Lead Free Finish/ RoHS Compliant

Applications:

1. Simple High-efficiency step-down regulator
2. On-card switching regulators
3. Positive to negative converter

Other data sheets are available within the file:

AP1501A-12K5G-13, AP1501A12K5GU, AP1501A-12K5L-13, AP1501A12K5LU

AP1501A Datasheet PDF Download


AP1501A pdf