Part Number: HJR-3FF, HJR-3FF-12VDC-S-Z

Function: Power Relay

Package: PCB 5 Pin Type

Manufacturer: TIANBO GANGLIAN ELECTRONICS

Images:

Description

The HJR-3FF is Power PCB Relay. (TIANBO GANGLIAN ELECTRONICS)

A power PCB (Printed Circuit Board) relay, also known as an electromagnetic relay or simply a power relay, is an electrical component used in electronic circuits to control high-power loads or electrical appliances. Power PCB relays are designed to switch relatively high currents and voltages, making them suitable for applications where low-power signal control needs to operate larger electrical devices.

Features

1. 10A switching capability

2. Small footprint

3. Sealed type available

CONTACT DATA :

Contact Contact Contact Form Material Ratings 1A/1C AgCdO AgSnO 1A:10A 240VAC, 15A 12VDC(TUV) 12A 120VAC/24VDC 250VAC/30VDC 15A 2770VA/240W 100m Ω Max 100,000 10,000,000 at 6VDC 1A Operations(at30Operations/minute) Operations 1C: 7A 240VAC/10A 120VAC/24VDC 5A 240VAC(TUV) Max Switching Voltage Max Switching Current Max Switching Power Contact Resistance Life Expectancy Electrical Machanical

Power PCB relays play a crucial role in enabling the safe and reliable control of high-power electrical loads in various electronic and industrial systems.

GENERAL DATA :

Insulation Resistance Dielectric Strength Between Open Contacts Between Contacts and coil Operate Time Release Time Temperature Range Shock Resistance Vibration Resistance Humidity Weight Safety Standard Operating Extremes Damage Limits 100M Ω Min at 500VDC 750VAC(for one minute) 1500VAC(for one minute) 10ms 5ms -40oC to+70 oC 10G 100G 10-50Hz 40—85% Approx 10g UL:E 173485 TUV:R 9859574,CH0062184-2001 1.5mm TIANBO GANGLIAN ELECTRONICS HJR-3FF S […]

HJR-3FF PDF Datasheet

Related articles across the web

• General Purpose Photocoupler

Part Number: 946H-1C-12D

Function: 946 Series, DC 12V, Relay

Type: 1 Form C

Package: PCB 6 Pin Type

Manufacturer: HSIN DA

Images:

Description

946H-1C-12D is DC 12V, 1 FormC, Relay. A relay allows a low-power electrical signal, such as from a microcontroller or sensor, to control a much larger current or voltage, such as required to drive a motor or light bulb. This allows a small electronic device to control a much larger one, or to isolate the low-power circuit from the high-power one. Relays are used in a wide range of applications, including automotive systems, HVAC systems, and computer power supplies.

1. DC 12V: This refers to the voltage at which the relay operates. It means the relay requires a 12-volt direct current (DC) supply to energize its coil and switch its contacts.

2. 1 Form C: This is a specification that describes the configuration of the relay’s contacts. “Form C” is also known as a “changeover” or “single-pole double-throw” (SPDT) contact configuration. It means that the relay has one common terminal (C) that can be connected to either of two other terminals (typically referred to as NO for Normally Open and NC for Normally Closed). When the relay is not energized, the common terminal is connected to the Normally Closed terminal. When the relay is energized, the common terminal is switched to the Normally Open terminal.

 

Features

1. UL safety approval.

2. Standard type & High sensitivity type available.

3. 2 Amps super miniature relay.

4. Conforms to FCC rules & regulation part 68.

5. Surge strength: 1500 VAC.

6. 1 Form C (SPDT) contact.

7. Nominal power 200mW～360mW.

8. Operating power 110mW～200mW.

9. DIL pitch terminal.

10. Washable Type (ultrasonic cleaning is not recommended).

Ordering Informations:

Contact Ratings:

1. Contact Arrangement: 1 Form C (SPDT)

2. Max. Switching Power:125VA 60W

3. Max. Switching Voltage: 125VAC 30VDC

4. Max. Switching Current: 2A

5. Contact Resistance: ≤100mΩ

6. Rating Load: 1A/125VAC, 2A/30VDC

7. Contact Material: Ag Alloy

 

946H-1C-12D PDF Datasheet