LT3669 Datasheet PDF – IO-Link Transceiver, QFN 28

Part Number: LT3669

Function: IO-Link Transceiver with Integrated Step-Down Regulator and LDO

Package: QFN 28 Pin type

Manufacturer: Linear Technology, Analog Devices

Pinouts:

LT3669 datasheet

 

Description

The LT3669 is an industrial transceiver that includes a step-down switching regulator and a low dropout linear regulator. Wake-up detect functionality, as well as a programmable power-on reset timer are also included.

The current limit and slew rate of the transmitters are externally adjustable for optimum EMC performance. The line drivers can source/sink up to250mA of current each or500mA when connected together, with a minimal residual voltage of less than2.1V.

An internal adaptive pulsing scheme allows the drivers to safely switch heavy capacitive loads and incandescent bulbs. Thermal shutdown provides additional protection. Line protection of ±60V in the line interface pins allows the use of standard TVSdiodes with L+ operating voltages up to 40V.

Features

1. IO-Link® PHY Compatible (COM1/COM2/COM3)

2. Cable Interface Protected to ±60V

3. Operation from 7.5V to 40V

4. Integrated 150mA LDO Linear Regulator

5. Rugged Line Drivers with Adjustable Slew Rate and Current Limit

6. Adaptive Line Driver Pulsing Scheme to Switch Heavy Loads Safely

Other data sheets are available within the file:

LT3669-2, LT3669EUFD, LT3669EUFD#PBF, LT3669EUFD#TRPBF

 

LT3669 Datasheet PDF Download


LT3669 pdf

SP3485 Datasheet PDF – Duplex RS-485 Transceiver

Part Number: SP3485

Function: +3.3V Low Power Full Duplex RS-485 Transceivers with 10Mbps Data Rate

Package: DIP 8 Pin Type

Manufacturer: Signal Processing Technologies

Image and Pinouts:
SP3485 datasheet

Description

The SP3481and the SP3485 are a family of +3.3V low power half-duplex transceivers that meet the specifications of the RS-485 and RS-422 serial protocols. These devices are pin-to-pin compatible with the Sipex SP481, SP483, and SP485 devices as well as popular industry standards. The SP3481 and the SP3485 feature Sipex’s BiCMOS process, allowing low power operation without sacrificing performance. The SP3481 and SP3485 meet the electrical specifications of RS-485 and RS-422 serial protocols up to 10Mbps under load. The SP3481 is equipped with a low power Shutdown mode.

Features

1. RS-485 and RS-422 Transceivers
2. Operates from a single +3.3V supply
3. Interoperable with +5.0V logic
4. Driver/Receiver Enable
5. Low Power Shutdown Mode (SP3481)
6. -7V to +12V Common-Mode Input Voltage Range
7. Allows up to 32 transceivers on the serial bus
8. Compatibility with the industry standard 75176 pinout
9. Driver Output Short-Circuit Protection

Receivers :

The receivers of the SP3481and SP3485 operate up to 10Mbps. The receiver for each of the three devices is equipped with fail-safe. Fail-safe guarantees that the receiver output will be in a HIGH state when the input is left unconnected.

Other data sheets are available within the file: SP3481, SP3481CN, SP3481CP ,SP3481EN, SP3481EP,

SP3485CN, SP3485CP, SP3485EN, SP3485EP

SP3485 Datasheet PDF Download


SP3485 pdf