74AC245 Datasheet PDF – Octal BUS Transceiver

Part Number: 74AC245

Function: OCTAL BUS TRANSCEIVER WITH 3-STATE OUTPUTS

Package: DIP 20, PLCC 20 Pin

Manufacturer: Texas Instruments

Image and Pinouts:

74AC245 datasheet

 

Description

The 74AC245 octal bus transceivers are designed for asynchronous two-way communication
between data buses. The control-function implementation minimizes external timing
requirements. When the output-enable (OE) is low, the device passes noninverted data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction control (DIR) input.

A high on (OE) disables the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OEshould be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

Applications

1. 2-V to 6-V VccOperation
2. Inputs Accept Voltages to 6 V
3. Max tpd of 7 ns at 5 V

 

74AC245 Datasheet PDF Download


74AC245 pdf

Other data sheets are available within the file: SN74AC245, 54AC245, SN54AC245,

SN74AC245N, SN74AC245DW, SN74AC245DWR

AR8031 Datasheet – Gigabit Ethernet Transceiver

Part Number: AR8031

Function: Ultra low-power 10/100/1000 RGMII/SGMII Gigabit Ethernet Transceiver

Package: 48-pin QFN type

Manufacturer: QUALCOMM, Atheros

Images  :

AR8031 datasheet

Description

The AR8031 is part of the Arctic family of PHYs – which includes the AR8030, AR8033, and AR8031.

This is Qualcomm  4th generation, single port, 10/100/1000 Mbps Ethernet PHY. It supports both RGMII and SGMII interfaces to the MAC. The device provides a low-power, low BOM (bill-of-materials) cost solution for a wide range of applications, including enterprise, carrier and home networks, SFP modules and media converters. This is supports both Sync-E and IEEE1588-V2 timing protcols.

The AR8031 device incorporates a 1.25 GHz SERDES which can be connected directly to fiber-optic transceivers for 1000 Base-X/100 Base-FX mode.

components

Solution Highlights

1. SGMII and RGMII MAC interface support
2. Atheros ETHOS-Designed Green Ethernet (EDGE™) power-saving technology
3. Fiber support to 1000Base-X and 100Base-FX with fault detect
4. Integrated MDI termination resistors
5. Full IEEE 802.3az support
6. Atheros proprietary SmartEEE support
7. Wake-on-LAN (WOL)
8. Jumbo frame support up to 10 kb full duplex
9. Synchronous-Ethernet support with recovered clock output
10. Complete IEEE 1588 V2 support
11. Single 3.3V supply

Specifications

1. 10/100/1000Base-T IEEE 802.3 compliant

2. Supports 1000Base-T PCS and auto-negotiation with next page support

3. Supports RGMII and/or SGMII interfaces to MAC devices

4. Supports Fiber and Copper combo mode when MAC interface works in RGMII mode

AR8031 Datasheet PDF Download

AR8031 pdf