TPS75301QPWPRQ1 Datasheet PDF – LDO Regulator

Part Number: TPS75301QPWPRQ1

Function: 1.5A Low-Dropout Voltage Regulator

Package: HTSSOP 20 Pin Type

Manufacturer: Texas Instruments


TPS75301QPWPRQ1 datasheet



The TPS753xxQ and TPS751xxQ are low dropout regulators with integrated power-on reset and power-good (PG) functions respectively. These devices are capable of supplying 1.5 A of output current with a dropout of 160 mV (TPS75133Q, TPS75333Q). Quiescent current is 75 µA at full load and drops down to 1 µA when the device is disabled. TPS751xxQ and TPS753xxQ are designed to have fast transient response for larger load current changes. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 160 mV at an output current of 1.5 A for the TPS75x33Q) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 75 µA over the full range of output current, 1 mA to 1.5 A). These two key specifications yield a significant improvement in operating life for battery-powered systems.


1. 1.5-A Low-Dropout Voltage Regulator
2. Available in 1.5-V, 1.8-V, 2.5-V, 3.3-V, Fixed Output and Adjustable Versions
3. Open Drain Power-Good (PG) Status Output (TPS751xxQ)
4. Open Drain Power-On Reset With 100-ms Delay (TPS753xxQ)
5. Dropout Voltage Typically 160 mV at 1.5 A(TPS75133Q)
6. Ultralow 75 µA Typical Quiescent Current
7. Fast Transient Response
8. 2% Tolerance Over Specified Conditions For Fixed-Output Versions
9. 20-Pin TSSOP (PWP) PowerPAD


1. Telecom
2. Servers
3. DSP, FPGA Supplies

Other data sheets are available within the file:



TPS75301QPWPRQ1 Datasheet PDF Download

TPS75301QPWPRQ1 pdf