TPS76815-EP Datasheet – 1A, Low-Dropout Voltage Regulator

Part Number: TPS76815-EP


Package: 20-Pin TSSOP (PWP)PowerPAD Type

Manufacturer: Texas Instruments


TPS76815-EP datasheet



This device is designed to have a fast transient response and be stable with 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost. Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 230mV at an output current of 1 A for the TPS76850) and is directly proportional to the output current. Additionally, since the PMOS pass element is avoltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 1 A).

These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high
signal to EN(enable) shuts down the regulator, reducing the quiescent current to less than 1 µA at TJ= 25°C. Power good (PG) is an active high output, which can be used to implement a power-on reset or a low-battery indicator.


1. 1−A Low-Dropout Voltage Regulator
2. Available in 1.5-V, 1.8-V, 2.5-V, 2.7-V, 2.8-V,
3.0-V, 3.3-V, 5.0-V Fixed Output and
3. Adjustable Versions
4. Dropout Voltage Down to 230 mV at 1 A (TPS76850)
4. Ultralow 85−µA Typical Quiescent Current
5. Fast Transient Response
6. 2% Tolerance Over Specified Conditions for
7. Fixed-Output Versions
8. Open Drain Power Good (See TPS767xx for Power-On Reset With 200-ms Delay Option)
9. Thermal Shutdown Protection
10. Controlled Baseline
11. One Assembly/Test Site
12. One Fabrication Site
13. Available in Military (−55C/125C)
14. Temperature Range
15. Extended Product LIfe Cycle
16. Extended Product−Change Notification
17. Product Traceability

Other data sheets are available within the file:

76801EP, 76815EP, 76818EP, 76825EP, 76827EP

TPS76815-EP Datasheet PDF Download

TPS76815-EP pdf