VFC320 Datasheet PDF – Frequency-to-Voltage Converter

Part Number: VFC320

Function: Voltage-to-Frequency and Frequency-to-Voltage CONVERTER

Package: DIP 14 Pin

Manufacturer: Burr-Brown, Texas Instruments

Image and Pinouts:

VFC320 datasheet

 

Description

The VFC320 monolithic voltage-to-frequency and frequency-to-voltage converter provides a simple low cost method of convert ing analog signals into digital pulses. The digital output is an open collector and the digital pulse train repetition rate is proportional to the amplitude of the analog input voltage. Output pulses are compatible with TTL, and CMOS logic families.

High linearity (0.005%, max at 10kHz FS) is achieved with relatively few external components. Two external resistors and two external capacitors are required to operate. Full scale frequency and input voltage are determined by a resistor in series with –In and two capacitors (one-shot timing and input amplifier integration). The other resistor is a non-critical open collector pull-up (fOUTto +V CC ).

Features

1. HIGH LINEARITY : 12 to 14 bits
(1) ±0.005% max at 10kHz FS
(2) ±0.03% max at 100kHz FS
(3) ±0.1% typ at 1MHz FS

2. V/F OR F/V CONVERSION

3. 6-DECADE DYNAMIC RANGE

4. GAIN DRIFT: 20ppm/°C max

5. OUTPUT TTL/CMOS COMPATIBLE

Applications:

1. INEXPENSIVE A/D AND D/A CONVERTER

2. DIGITAL PANEL METERS

3. TWO-WIRE DIGITAL TRANSMISSION WITH NOISE IMMUNITY

3. FM MOD/DEMOD OF TRANSDUCER SIGNALS

4. PRECISION LONG TERM INTEGRATOR

Other data sheets are available within the file: VFC320BP, VFC320CP

VFC320 Datasheet PDF Download


VFC320 pdf